Power Equipment - DSE Connect

Go to content

Main menu:

Products
12 Port Gigabit PoE Injector

12 Port Gigabit PoE Injector

POE-12G, is a 12-port passive gigabit rack-mount POE injector. The input voltage is capable of 18-57V, making it ideal for a range of products. The unit can be mounted in any rack-mount cabinet supplied by Scoop. Ie CAB-4U, CAB-6U,...9U etc.

R 1275,00 Add
12V7Ah Sealed Lead Acid Battery

12V7Ah Sealed Lead Acid Battery

12V Sealed Acid Battery allows for back-up power in the case of loss of power to the client site or high-site.

R 220,00 Add
16 Port Fast Ethernet PoE Injector

16 Port Fast Ethernet PoE Injector

16 Port Fast Ethernet PoE Injector is a panel which integrates 16 passive POE injectors suitable for powering up to 16 devices. If the powered device has a PoE extractor it can be combined with a passive POE splitter. Power wireless POE devices, Mikrotik routers or any other passive POE units. Scoops POE-KIT can be used with the POE-16 to split the power and data from the cable, to power up non-POE devices that use the voltage that is being put out by the POE-16.

R 575,00 Add
16 Port Gigabit PoE Injector

16 Port Gigabit PoE Injector

POE-16G, 16 port Gigabit PoE panel features and flexible power (DC 18 - 57V) and can be used with any Ethernet switch. The RJ45 socket delivers data and power. Each socket provides current protection against short overflow. The configuration size of the panel is 1U (height), 19” (width) and 52mm (thickness).

R 1560,00 Add
2 Male - Female C19 to C20 16A IEC Lead

2 Male - Female C19 to C20 16A IEC Lead

POW-C19-MF is a 2 meter Male to Female C19/C20 Power Lead.

R 330,00 Add
24 Port Fast Ethernet PoE Injector

24 Port Fast Ethernet PoE Injector

POE-24 is a 24 port passive POE injector panel. The panel can supply 12V - 57V depending on the power supply connected to it. It has a maximum current protection of 1000mA(+10%-10%) per port and is capable of 10/100 transmission speeds. The unit can be rack-mounted and only takes up 1U of cabinet space.

The upper ports are plain data ports while the below ports are the POE + data ports. Pins 1/2 & 3/6 transmit data, pins 4/5(+) & 7/8(-) are used for power.

Please note that the MAX inputs: DC - 12V-57V 8A. 3Pin power cord - 12V-57V 16A.

R 705,00 Add
24V 1.5 Amp 3 Pin Power Supply

24V 1.5 Amp 3 Pin Power Supply

24V power supply can be used with most RouterBoards.

R 160,00 Add
4 Port Fast Ethernet PoE Injector

4 Port Fast Ethernet PoE Injector

POE-4, is a 4-port passive Fast Ethernet POE injector for use with devices that can be powered by passive POE. The input voltage is capable of 12-57V, making it ideal for a range of products. The unit is very compact and can be wall-mounted, making it suitable for environments that require minimal space usage.

R 145,00 Add
4 Port Gigabit PoE Injector

4 Port Gigabit PoE Injector

POE-4G, is a 4-port passive gigabit POE injector for use with devices that can be powered by passive POE. The input voltage is capable of 12-57V, making it ideal for a range of products. The unit is very compact and can be wall-mounted, making it suitable for environments that require minimal space usage.

R 225,00 Add
5v 2 Amp 3 Pin Power Supply

5v 2 Amp 3 Pin Power Supply

POW-5 is a 5V power supply and can be used with the Fanvil FAN-X5, FAN-X5G and FAN-X3P.

R 165,00 Add
8 Port Fast Ethernet PoE Injector

8 Port Fast Ethernet PoE Injector

he POE-8 passive PoE injector supports 10/100 ethernet connectivity and has 16 RJ45 sockets in total, 8 of which are used for Data only and the other 8 used for Power and Data. The RJ45 Pins 1/2 & 3/6 are used for transmitting data and pins 4/5 & 7/8 are used for transmitting power. The DC input jack is 2.1mm and the outer diameter is 5.5mm. The total output power should be less than the input supply with the max output per port being 12-56VDC (30W)

R 150,00 Add
8 Port Gigabit Passive PoE Injector DC

8 Port Gigabit Passive PoE Injector DC

Use this 8 Port Passive Gigabit PoE injector to power up to 8 Passive Gigabit PoE devices through a single power source. Ideal for powering AP's, IP cameras or VoIP phones.

R 275,00 Add
802.3af/at to 24VDC Indoor Converter

802.3af/at to 24VDC Indoor Converter

POE-802I, is a gigabit POE convertor that converts 802.3af/at (48V)POE to passive 24V POE. The device is great for situations where there is only an 802.3af/at POE switch in place and an POE device that requires passive POE.

R 165,00 Add
Dedicated 2 Way IEC Power Cable

Dedicated 2 Way IEC Power Cable

The 2 Way IEC Power Cables are manufactured according to the ISO 9002 specifications, ensuring outstanding quality. They are fully moulded and available in 2 metre lengths.

R 65,00 Add
Dedicated 3 Way IEC Power Cable

Dedicated 3 Way IEC Power Cable

A 3 Way IEC Power Cable, manufactured according to the ISO 9002 specifications, ensuring outstanding quality. It is fully moulded and available in 2 metre lengths.

R 85,00 Add
Multi Plug 4x16A 4x5A - 5m Cord

Multi Plug 4x16A 4x5A - 5m Cord

Multi-Plug is surge protected with a 5 metre cord. It protects against electrical surges resulting from lighting strikes and power sources.

R 475,00 Add
Multi Plug 4x16A 4x5A - Surge Arrestor

Multi Plug 4x16A 4x5A - Surge Arrestor

Multi-Plug is surge protected with 4x16A and 4x5A sockets. It protects against electrical surges resulting from lightning strikes and power sources.

R 280,00 Add
Multi Plug 5x16A 5x5A 0.5m Cord

Multi Plug 5x16A 5x5A 0.5m Cord

Multi-Plug is surge protected with 5x16A and 5x5A sockets. It protects against electrical surges resulting from lightning strikes and power sources.

R 160,00 Add
Multi Plug 5x16A 5x5A 0.5m IEC Cord

Multi Plug 5x16A 5x5A 0.5m IEC Cord

Multi-Plug is surge protected with 5x 16A and 5x 5A sockets. It protects against electrical surges resulting from lightning strikes and power surges. Use to power up from any UPS device with an IEC male connector.

R 185,00 Add
POW-5 12VDC 5 Amp IEC PSU with SA Cable

POW-5 12VDC 5 Amp IEC PSU with SA Cable

POW-105, 12V 5A adapter, is the answer when looking for a power supply with enough current to power several devices simultaneously. The adapter comes with an extension that splits the 1x DC jack into 4x DC jacks for use with multiple devices. This power supply works well with the POE-8ECO, POE-8, POE-8G, POE-16G or multiple POE passive injectors. The power input is 100V-240V ac via IEC power cable.

R 255,00 Add
Recycled 24V Ubiquiti PoE No Cable

Recycled 24V Ubiquiti PoE No Cable

POE-24R is a Recycled PoE unit. These PoE's have simply been bought back from our customers who did not require the PoE unit as included in another pre-packaged product. You now have the option to purchase these PoE's at a reduced price.

Please note: The POE-24R is supplied without a power cable which must be purchased additionally.
This PoE provides earth grounding, surge protection and helps protect against ESD attacks (the leading cause for device failures). You can effectively protect against ESD attacks by using a grounded Ubiquiti PoE Adapter, Shielded Cable and connectors.

R 50,00 Add
Single Port Fast Ethernet PoE Injector

Single Port Fast Ethernet PoE Injector

Power over Ethernet (PoE) Passive Injector delivers both data and electrical power to passive PoE devices using a single Ethernet cable.
The POE supports Fast Ethernet Passive PoE-enabled devices, PIN 1/2/3/6 for Data and PIN 4/5/7/8 for Power. It can be wall mounted.

R 30,00 Add
Tenda 802.3af Fast Ethernet PoE Injector

Tenda 802.3af Fast Ethernet PoE Injector

POE-15F, PoE injector by Tenda enables synchronous delivery of data and power via a single Ethernet cable (Cat.5 or better). The output power per port is up to 15W, which can serve as an outlet for a PoE device (powering via RJ45 port). You can connect the PoE15F to an IEEE 802.3af compliant device, such as a wireless AP, IP camera, IP phone, etc. Ideal for reducing installation cost and improving network performance.

R 175,00 Add
Tenda 802.3at Gigabit PoE Injector

Tenda 802.3at Gigabit PoE Injector

PoE30G PoE Injector, by Tenda, delivers up to 30W PoE without sacrificing 10/100/1000 Ethernet speeds.
By using this device, both data and power can be simultaneously delivered through a single CAT5 (or better) Ethernet cable to any 802.3af/at PoE device, eliminating the need to connect it to a nearby power outlet. You can connect it to a wireless AP, Web cam (IP Camera), IP telephone, or any other 802.3af/at PoE device for the purpose of reducing installation cost and improving your network performance.

R 325,00 Add
Ubiquiti 802.3af to 24VDC Gigabit Outdoor Adapter

Ubiquiti 802.3af to 24VDC Gigabit Outdoor Adapter

Ubiquiti's Instant 802.3af Gigabit PoE Converter transforms any Ubiquiti® UniFi®, UniFi Video, or airMAX® 24V PoE (Power over Ethernet) device into a fully compliant, 802.3af‑compatible product. The Instant 802.3af Gigabit PoE Converter works with 10/100/1000 Mbps ports to deliver high throughput speeds over its wired connection.
The Instant 802.3af Gigabit PoE Converter integrates seamlessly with a variety of auto-sensing 802.3af PoE switches for remote power control applications. As you manage and monitor your network, you can conveniently power or power cycle your remote devices using your 802.3af switch. For ease of power management, you can centralize the 802.3af switch and power source, and you can include a UPS (Uninterruptible Power Supply) as a backup. This way your network continues to run even during a temporary power outage.

High voltage carries power more efficiently (using less current) than low voltage. The Instant 802.3af Gigabit PoE Converter enables longer cable runs due to a more efficient power delivery – so your products can get the power they require even when they are located far from the 802.3af switch. It also provides an additional ±15kV of Ethernet isolation for built-in protection that lessens the risk of ESD or surge damage to your devices.

R 395,00 Add
Ubiquiti EdgePower 54V 150W Power Suppl

Ubiquiti EdgePower 54V 150W Power Suppl

Ubiquiti's The EdgePower™ is a high-power, modular PSU system designed to connect to EdgePoint™ routers/switches, and provide reliable power to attached PoE devices. The EdgePower uses modular PSUs for flexible configuration options. The EdgePower can utilize two modular PSUs to provide up to 300W of power, or be configured to provide up to 150W of power with an automatic PSU backup. It consists of a rack-mountable, two-bay housing and control unit, and includes one AC-DC 54V, 150W PSU module. The second PSU bay can house an AC-DC or DC-DC PSU module (sold separately).

R 3695,00 Add
Ubiquiti EdgePower Backup 150W AC PSU

Ubiquiti EdgePower Backup 150W AC PSU

EP-54V150WAC is sold separately for use with Ubiquiti's EP-54V150W, EdgePower 54V 150W Power Supply. These modular PSUs ensures for flexible configuration options. The EdgePower can utilize two modular PSUs to provide up to 300W of power, or be configured to provide up to 150W of power with an automatic PSU backup. The EdgePower consists of a rack-mountable, two-bay housing and control unit, and includes one AC-DC 54V, 150W PSU module. The second PSU bay can house an AC-DC or DC-DC PSU module (sold separately)

R 1525,00 Add
Ubiquiti Fibre to Ethernet Converter with PoE

Ubiquiti Fibre to Ethernet Converter with PoE

POE-FIBRE, Optical Data Transport for Outdoor PoE Devices is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE also provide significant EMI and ESD protection over typical PoE installations. With the FiberPoE, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs.
The FibrePoE only provides Gigabit bi-directional data transport (no auto negotiation) between twisted-pair Ethernet cable and fibre optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE device as an Fibre‑to‑Ethernet Converter, or a pair of FiberPoE devices to create a Fibre Bridge.

R 575,00 Add
Ubiquiti PoE Fast Ethernet 24V SA Plug

Ubiquiti PoE Fast Ethernet 24V SA Plug

POE-24F by Ubiquiti, is designed for BaseStation Equipment and features earth grounding/ESD protection.
The POE-24F has a LAN activity indicator and a remote reset capability that supports AirMax Bullet, Rocket, Nano and Pico.

R 150,00 Add
Ubiquiti PoE for AF5X 24V 1A SA Plug

Ubiquiti PoE for AF5X 24V 1A SA Plug

POE-24X, by Ubiquiti, is a 24V, 1A PoE Gigabit Adapter which provides earth grounding and surge protection. Helps protect against ESD attacks and powers Ubiquiti airFiber AF-5X.

R 295,00 Add
Ubiquiti PoE Gigabit 24V 1A SA Plug

Ubiquiti PoE Gigabit 24V 1A SA Plug

POE-24G, by Ubiquiti, provides earth grounding and surge protection, helps protect against ESD attacks and powers Ubiquiti PoE Devices such as, airMAX®, airVision®, UniFi® and mFi®.
ESD attacks are the leading cause for device failures. You can effectively protect against ESD attacks by using a grounded Ubiquiti PoE Adapter, Shielded Cable and connectors.

IMPORTANT:
POE-24G does not work with the AIRGW products (Ubiquiti AirGateways)

R 275,00 Add
Ubiquiti PoE Injector 50V 60W airFiber PoE

Ubiquiti PoE Injector 50V 60W airFiber PoE

POE-50 by Ubiquiti, provides a variety of features to help protect your Ubiquiti AirFiber, such as Surge protection, Clamping protection, Maximum surge discharge and Peak pulse current.
ESD attacks are the leading cause for device failures. You can effectively protect against ESD attacks using a grounded Ubiquiti PoE Adapter.

R 325,00 Add
Passion for technology
Technology is changing at a rapid rate and it’s important to be aware of these changes. At Solid we love technology and we’re studying new ways of improving the tools we use, not only for the benefit our clients, but also to help our staff work more efficiently.

Passion for people
Our people are the heart of our business. They know how to build honest and long-term relationships. Combined with the most sophisticated tools available, they will always find solutions and deliver the answers in the best way possible.
Back to content | Back to main menu