Networking - DSE Connect

Go to content

Main menu:

Products
2 Meter DVI-D Male to DVI-D Male Cable

2 Meter DVI-D Male to DVI-D Male Cable

DVI-D Male (24 + 1) to DVI-D Male (24 + 1) Cable
Length: 2Metres

R 135,00 Add
Green Connection 10 Meter HDMI Cable Version 1.4

Green Connection 10 Meter HDMI Cable Version 1.4

Scoop's HDMI-10 is a 10m high-speed HDMI cable with Ethernet. Scoop's 10m HDMI Cable Version 1.4 adds high-speed networking to an HDMI link‚ allowing users to take full advantage of their IP-enabled devices without a separate Ethernet cable. It also allows an HDMI-connected TV with a built-in tuner to send audio data "upstream" to a surround sound audio system‚ eliminating the need for a separate audio cable.
The HDMI-10 defines input/output protocols for major 3D video formats‚ paving the way for true 3D gaming and 3D home theatre applications. The 4K x 2K resolution support enables video resolutions far beyond 1080p‚ supporting next generation displays that will rival the Digital Camera systems used in many commercial movie theatres. It also adds support for additional colour models used in digital photography and computer graphics.

Specifications - Audio Return Channel
- Supports 3D
- Resolution 2k*4k
- HDMI Ethernet channel at 100Mbps
- 19+1pin, copper, triple shielding, gold-plated

R 310,00 Add
Green Connection 10 Meter USB Active Extension Cable

Green Connection 10 Meter USB Active Extension Cable

Scoop's USB 2.0 A-Male to A-Female Active, Repeater, Extension Cable is a bus-powered extension cable that can be used to increase the length of a device cable without the worry of signal loss and potential performance problems.
Specifications for USB state that the maximum length of a USB cable is 5 metres. Users can now extend the distance as the USB-E10 contains active electronics which boost the USB signal for maximum reliability and performance over extended distances.

Specifications - Compliant with USB 2.0 High-Speed (480Mbps)
- Active USB extension cable‚ ensures good signal quality
- Meets USB2.0 specifications
- Extend USB signal up to 10 Metres
- Plug-and-play, no additional drivers required
- Gold-plated connector

R 230,00 Add
Green Connection 20 Meter HDMI Cable Version 1.4

Green Connection 20 Meter HDMI Cable Version 1.4

Specifications - Audio Return Channel
- Supports 3D
- Resolution 2k*4k
- HDMI Ethernet channel at 100Mbps
- 19+1pin, copper, triple shielding, gold-plated

R 1210,00 Add
Green Connection USB to Ethernet Adapter

Green Connection USB to Ethernet Adapter

Scoop's USB to Ethernet Adapter is a modern way of integrating effectiveness with speed, it also provides a low-cost solution for desktops, laptops and notebook computers.
To connect an external device to the computer the user has to use the USB ports available in the front or rear side of the motherboard. Once the cable is put in place it enables easy use of the local area network, or connection between two or more computers. Most of the external peripherals use a USB port for connection with the main computer.

Specifications - Integrated Fast Ethernet MAC‚ Physical Chip and transceiver in one chip
- Supports 10MB/s and 100MB/s N-Way Auto-negotiation operation
- Compliant with USB interface Version 1.0 / 1.1 / 2.0
- Full-Speed (12MB/S) USB Device
- Supports all USB standard commands
- Supports Full Duplex Flow Control (IEEE 802.3X)
- Windows 98/SE/ME/2000/XP/Vista/7

R 240,00 Add
Green Connection USB to Serial 9 Pin Converter

Green Connection USB to Serial 9 Pin Converter

Scoop's USB to Serial 9 Pin Converter adapter is designed for connections to Cell-phones, PDA, digital cameras, modems, or ISDN terminal adapters through your USB port.

Specifications - Fully compliant with USB Specifications v1.1(0) and USB CDC v1.1
- Designed for connections to Cellular Phones‚ Digital Cameras‚ Modems or ISDN terminal adapters
- RS232 Serial interface
- Automatic handshake mode
- Over 1Mbps data transfer rate
- Remote wake-up and power management
- 96 bytes buffer each for upstream and downstream data flow
- Default ROM or external EEPROM for device configuration
- Windows 98/98S/ME/2000/XP/Vista/7‚Linux2.4

R 170,00 Add
Green Connection VGA to HDMI Converter

Green Connection VGA to HDMI Converter

Scoop's VGA to HDMI Converter converts PC, VGA and audio to HDMI‚ allowing you to connect your PC up to a 1080p HDTV.
It supports multiple resolutions up to 1920x1080@60HZ. However, without a scaler it supports the most popular resolutions to ensure compatibility with a wide range of PCs and HDTV brands.

It is USB powered and has no PSU.

R 915,00 Add
Home Products Wired Networking Green Connection HDMI Extender 50 Meter over Ethernet

Home Products Wired Networking Green Connection HDMI Extender 50 Meter over Ethernet

Scoop's HDMI Extender over CAT5e/6 cable allows the user to extend their HDTV display by up to 50 meters for 1080p. It not only eliminates the limitation of the HDMI cable transmission length, but also offers greater flexibility and convenience in it's cable construction.

Specifications - One pair as a full functional module
- One piece of CAT-5e/6 cable can substitute HDMI cable to achieve long distance transmission
- Transmission distance up to 50 meters for 1080p using CAT-6 Cable
- Auto-adjustment of feedback, equalization and amplification
- Compact size
- Signalling rates up to1.65Gbps in support of 1080P display

R 1995,00 Add
Home Products Wired Networking MikroTik RB260GS Gigabit 5xGE SwOS Desktop Switch

Home Products Wired Networking MikroTik RB260GS Gigabit 5xGE SwOS Desktop Switch

Home Products Wired Networking MikroTik RB260GS Gigabit 5xGE SwOS Desktop Switch
MikroTik RB260GS Gigabit 5xGE SwOS Desktop Switch
Zoom



MikroTik RB260GS Gigabit 5xGE SwOS Desktop Switch

Specifications - Architecture: RISC
- LAN ports: 5
- Gigabit: Yes
- MiniPCI: 0
- miniPCI-e: 0
- Integrated Wireless: 0
- USB: 0
- Memory Cards: 0
- Power Jack: 9-28V DC
- PoE: Yes
- Operating System: MikroTik SwOS
- Temperature range: -25℃ to +65℃
- Max Power consumption: 6W
- SFP ports: 1
- Dimensions: 113 x 89 x 28mm

R 740,00 Add
Home Products Wired Networking Tenda 16-Port Fast Ethernet Desktop Switch

Home Products Wired Networking Tenda 16-Port Fast Ethernet Desktop Switch

Scoop's S16 by Tenda is a 16-port Desktop Ethernet switch that supports Auto MDI/MDI-X, NWAY auto-negotiation with 4K MAC address auto-learning/-aging.
With the non-blocking switching fabric in full-duplex mode, it can reach up to 200 Mbps maximum speed per port, totaling 3.2Gbps of switching capacity. It minimises bottlenecks, allowing your network to run smoothly even during the heaviest volume of traffic.

It is a plug-and-play device with stable performance and a high forwarding rate, especially for Internet cafe's, communities and small enterprises.

Specifications - Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
- Interface: 16 RJ-45 Ports
- Speed: 10/100Mbps
- LED: Power, LINK/ACT
- Input Voltage Range: AC100-240V 50/60Hz 0.3A
- Output Voltage Range: DC 9V 1A
- Forwarding Scheme: Store-&-forward
- MAC Address Table: 4K
- MAC Address Learning: Yes
- Back-plane Bandwidth:

R 325,00 Add
Home Products Wired Networking Tenda 200M Powerline Fast Ethernet Bridge

Home Products Wired Networking Tenda 200M Powerline Fast Ethernet Bridge

Tenda's P200 enables you to set-up a home or office network with minimum effort and cost, the Tenda 200Mbps Powerline Adapter P200 is allows home or office power circuitry to be used to extend network connections from your broadband router. You can easily and instantly create a power-line network of up to 200Mbps. The QoS feature prioritises your bandwidth intensive applications for a lag-free experience.

Specifications Standard & Protocol: IEEE 802.3,IEEE 802./3u
Interface: 1 x 10/100M LAN/WAN (interchangeable) port
Button: 1 x Pair/Reset
Power: AC 100V-240V 50/60Hz
Dimensions: 53mm x 53mm x 27mm
LED: 1 x POWER,1 x PLC,1 x LAN
Speed: 200Mbps
Operating Temperature: 0℃ ~ 45℃
Storage Temperature: -40℃ ~ 70℃
Operating Humility: 10% ~ 90% RH Non-condensing
Storage Humility: 3% ~ 90% RH Non-condensing

R 275,00 Add
Home Products Wired Networking Tenda 200M Wireless Powerline Ethernet Bridge

Home Products Wired Networking Tenda 200M Wireless Powerline Ethernet Bridge

Scoop's P200W Powerline Wireless N300 Extender, by Tenda, uses the existing electrical wiring at your home to create a wireless network. It also extends your powerline network to every corner of your house without the mess of cables.
Compliant with Homeplug AV and IEEE802.11n standards, this powerline adapter transforms every electrical outlet into a high speed wireless network of up to 300Mbps to access computers, smartphones, game consoles and other WiFi-enabled devices throughout your home. No drilling, no wiring! With the Tenda PW201A, you can build your wireless network with minimum effort and cost.

Specifications - Standards: IEEE 802.3, IEEE 802./3u, HomePlugAV, IEEE802.11 b/g/n
- Interface: 1x10/100M LAN/WAN (interchangeable) port
- Antenna: Internal 2.4G PCB antenna
- Button: 1 x WPS/Reset; 1 x Pair
- Power Input: AC:100~240V;50/60Hz 0.2A
- LED: WPS, Wireless, Power, PLC, LAN
- Wireless Speeds: 300Mbpsbr>- Frequency: 2.4GHz
- Basic Features Wireless: Enable/Disable SSID
- Broadcast: Enable/Disable
- Channel: 1-13
- Channel Bandwidth: 20MHz, 20/40MHz
- Network Mode: 11 b/g/n mixed, 11 b/g mixed, 11g, 11b
- Security: Wireless Access Control (Wireless MAC filter)
- Wireless Security: Enable/Disable, 64-/128-bit WEP; WPA-PSK/WPA2-PSK
- Operating Temperature: 0℃ ~ 40℃
- Storage Temperature: -40℃ ~ 70℃
- Operating Humidity:10% ~ 90% RH non-condensing
- Storage Humidity: 5% ~ 90%RH non-condensing
- Dimensions: 94mm (L) x 60mm (W) x 48mm (H)

R 420,00 Add
MikroTik CCR1009 Cloud Core 9xCPU SFP PC

MikroTik CCR1009 Cloud Core 9xCPU SFP PC

Scoop's RB-CCR1009PC, 9-core Cloud Core Router by MikroTik RouetBOARD is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so it runs completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.
With no switch-chip - the device features only fully independent Ethernet ports each with a direct connection to the CPU, allowing full potential utilization of CPU processing power on ports.

The combo-port is a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnection, the combo-port provides a hardware fail-over feature.

This device supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules. It also offers more throughput with the ports being directly connected to the CPU.

Specifications CPU nominal frequency: 1 GHz
CPU core count: 9
Size of RAM: 1 GB
10/100/1000 Ethernet ports: 7
Number of USB ports: 1
Power Jack: 1
PoE in: Yes
Supported input voltage: 18 V - 56 V
Voltage Monitor: Yes
PCB temperature monitor: Yes
CPU temperature monitor: Yes
Operating System: RouterOS
License level: 6
Current Monitor: Yes
CPU: TLR4-00980CG-10CE-A3a
Max Power consumption: 25W
USB slot type: microUSB type AB
Serial port: RS232 + Header
Storage type: NAND
Storage size: 128 MB
CPU Threads count: 9
Tested ambient temperature: -20C to +60C
Dimensions: 272 x 190 x 47mm

R 7260,00 Add
MikroTik CCR1009 Cloud Core 9xCPU SFP+

MikroTik CCR1009 Cloud Core 9xCPU SFP+

Scoop's RB-CCR1009+ by MikroTik RouterBOARD, is a powerful Ethernet router based on the cutting edge TILERA 9 core CPU. It comes with 2GB of RAM, eight Gigabit Ethernet ports, one SFP port and one SFP+ port with 10G support (SFP module not included).
The RB-CCR1009+ has dual power supplies built in for redundancy (if one power line fails, the other one will take over automatically). It also supports a Smart card, to store your private key for use in all features that support Certificate based authentication.

Specifications - CPU nominal frequency: 1.2 GHz
- SFP DDMI: Yes
- CPU core count: 9
- Size of RAM: 2 GB
- Architecture: TILE
- 10/100 Ethernet ports: 0
- 10/100/1000 Ethernet ports: 8
- MiniPCI slots: 0
- MiniPCI-e slots: 0
- Number of USB ports: 1
- Power Jack: 2 x IEC C14 AC 110/220V
- 802.3af support: Yes
- PoE: 12-58V
- Voltage Monitor: Yes
- PCB temperature monitor: Yes
- CPU temperature monitor: Yes
- Operating System: RouterOS
- Operating temperature range: -20C .. +60C
- License level: L6
- Current Monitor: Yes
- CPU: TLR4-00980CG-10CE
- Max Power consumption: 35W (with loaded SFP)
- SFP ports: 1
- SFP+ ports: 1
- USB slot type: microUSB type AB
- Number of chains: 0
- Dimensions: 444 x 175 x 47mm

R 8375,00 Add
MikroTik CCR1016 Cloud Core 16xCPU LCD

MikroTik CCR1016 Cloud Core 16xCPU LCD

Scoop's RB-CCR1016 by MikroTik RouterBOARD is an industrial grade super fast router with cutting edge 16 core CPU. If you need many millions of packets per second - Cloud Core Router is an excellent choice.
The cloud core router is powered by RouterOS, a fully featured routing operating system with dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring being a few of the vast number of features supported by RouterOS.

The device is available with a 1U rack-mount case, has twelve Gigabit Ethernet ports, a serial console cable and a USB port. The CCR1016 has two SODIMM slots, and is shipped with 2GB of RAM, though it has no memory limit in RouterOS (will accept and utilize 16GB or more). Power supply and 1U rack-mount case is included.

Specifications - CPU speed: 1.2GHz
- CPU cores: 16
- RAM: 2GB
- Architecture: Tile GX
- LAN ports: 12
- Gigabit: Yes
- MiniPCI: 0
- USB: Yes
- Power Jack: IEC C14 standard connector 110/220V (PSU included)
- PoE: No
- Voltage Monitor: Yes
- PCB temperature monitor: No
- CPU temperature monitor: Yes
- Operating System: RouterOS v6 (64bit)
- Temperature range: Max ambient temperature 50C @1.2Ghz; 70C @1Ghz CPU core frequency
- RouterOS License: L6
- Current Monitor: Yes
- CPU: Tilera Tile-Gx16
- Max Power consumption: 38W
- Dimensions: 355 x 145 x 55cm

R 10995,00 Add
MikroTik CCR1016 Cloud Core 16xCPU SFP+

MikroTik CCR1016 Cloud Core 16xCPU SFP+

Scoop's RB-CCR1016+, by MikroTik RouterBOARD is an industrial grade router with a cutting edge 16 core Tilera CPU. If you need many millions of packets per second - Cloud Core Router is your ideal choice.
This model has twelve SFP ports and one SFP+ port for 10G connectivity. It is available in a 1U rack mount case and also has a serial console port, a touchscreen LCD and a USB port. The RB-CCR1016+ comes with redundant power supplies and one RJ45 SFP 10/100/1000M copper module.

Specifications - CPU nominal frequency: 1.2 GHz
- SFP DDMI: Yes
- CPU core count: 16
- Size of RAM: 2 GB
- Architecture: TILE
- 10/100 Ethernet ports: None
- 10/100/1000 Ethernet ports: None
- MiniPCI slots: 0
- MiniPCI-e slots: 0
- Number of USB ports: 1
- Power Jack: 2x IEC C14
- 802.3af support: No
- PoE: No
- Voltage Monitor: Yes
- PCB temperature monitor: No
- CPU temperature monitor: Yes
- Operating System: RouterOS v6
- Operating temperature range: Max ambient temperature 50° @ 1.2GHz; 70° @ 1GHz CPU core frequency
- License level: L6
- Current Monitor: Yes
- CPU: TLR4-01680CG-12CE-A3
- Max Power consumption: 44W (with loaded SFP)
- SFP ports: 12
- SFP+ ports: 1
- USB slot type: microUSB type AB

R 12495,00 Add
MikroTik CCR1036 Cloud Core 36xCPU SFP

MikroTik CCR1036 Cloud Core 36xCPU SFP

Scoop's RB-CCR1036 by MikroTik RouterBOARD is a carrier grade router with a cutting edge 36 core Tilera CPU. Unprecedented power and performance -the Cloud Core supports throughput of up to 24 million packets per second, or up to 16 gigabits - full wire speed.
This carrier grade router comes in a 1U rack-mount case, has four SFP ports, twelve Gigabit Ethernet ports, serial console and a USB port. A color touchscreen displays device status, traffic graphs, and provides access to configuration options.

It has two SODIMM slots, and is shipped with 4GB of RAM, though it has no memory limit in RouterOS and will accept and utilize 16GB or more. It comes with power supply and 1U rack-mount case.

The cloud core router is powered by RouterOS, a fully featured routing operating system which has been continuously improved over the last fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring, are just a few of the vast number of features supported by RouterOS.

Specifications - CPU speed: 1200MHz
- CPU cores: 36
- RAM: 4GB
- Architecture: Tile GX
- LAN ports: 12
- Gigabit: Yes
- MiniPCI: 0
- Integrated Wireless: No
- USB: Yes
- Power Jack: IEC standard connector 110/220V (PSU included)
- PoE: No
- Voltage Monitor: Yes
- PCB temperature monitor: No
- CPU temperature monitor: Yes
- Operating System: RouterOS v6 (64bit)
- Temperature range: Max ambient temperature 50C @1.2Ghz
- Temperature range: 70C @1Ghz CPU core frequency
- RouterOS License: L6
- Current Monitor: Yes
- CPU: Tilera Tile-Gx36
- Max Power consumption: 60W
- SFP ports: 4
- Dimensions: 355 x 145 x 55cm

R 16750,00 Add
MikroTik CCR1072 Cloud Core 72xCPU SFP+

MikroTik CCR1072 Cloud Core 72xCPU SFP+

Scoop's RB-CCR1072S+ by MikroTik RouterBOARD, is a Cloud Core Router powered by a Tilera 72 core CPU. Each core is clocked at 1GHz, and to fully utilise this power, the CCR1072 is equipped with eight independently connected 10G SFP+ ports.

The unit comes equipped with installed RouterOS L6, 16GB of built-in ECC RAM, touchscreen colour LCD, two removable (hot-plug) power supplies for redundancy, smart card slot, microUSB, regular size USB, microSD and 2x M.2 slots for additional storage.

Thanks to the unique 72 core processor and ports that are directly connected to the CPU, the CCR1072 is capable of over 100 million packets per second throughput.

Specifications - CPU nominal frequency: 1 GHz
- CPU core count: 72
- Size of RAM: 16 GB
- Architecture: TILE
- 10/100 Ethernet ports: None
- 10/100/1000 Ethernet ports: 1
- MiniPCI slots: 0
- MiniPCI-e slots: 0
- Number of USB ports: 2
- Memory Cards: 3
- Memory card type: microSD, 2x M.2
- Power Jack: 0
- Supported input voltage: 12 V - 12 V
- PoE out: No
- PoE in: No
- Voltage Monitor: Yes
- PCB temperature monitor: Yes
- CPU temperature monitor: Yes
- Operating System: RouterOS
- Operating temperature range: -20C .. +60C
- License level: 6
- Current Monitor: Yes
- CPU: TLR4-07280DG-10CE
- Max Power consumption: 125W
- SFP ports: 0
- SFP+ ports: 8
- USB slot type: USB type A
- Serial port: RJ45

- Dimensions: 443 x 315 x 40mm

R 52750,00 Add
MikroTik Cloud Router Switch 5xSFP 1xCombo Port

MikroTik Cloud Router Switch 5xSFP 1xCombo Port

MikroTik RouterBOARD's Cloud Router Switch 106-1C-5S is a desktop size smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with a L5 license and supports 11-30V power. Power supply is included.

Specifications Size of RAM: 128 MB
Storage type: Flash
Storage size: 16 MB
SFP: 5x 1.25G Ethernet SFP cage (Mini-GBIC; SFP module not included), DDMI support
Combo port: 1 (Gigabit Ethernet / SFP)
PoE in: Yes
License: Level 5
Operating System: RouterOS
Max Power consumption: 11 W
LEDs: 9x LEDs (1x user LED)
Serial port: RJ45
Dimensions: 114 x 137 x 29mm

R 1040,00 Add
MikroTik CRS109 Cloud Switch WiFi and SFP

MikroTik CRS109 Cloud Switch WiFi and SFP

Scoop's RB-CRS109S2IN Cloud Router Switch, by MikroTik RouterBOARD is a ""small-size-low-cost"" member of the CRS series. It comes with eight Gigabit Ethernet ports and high power 1000mW 2.4GHz wireless. It supports 10-57V and is 802.3af/at compliant.
The CRS series combines the best features of a fully functional router and a Layer 3 switch and is powered by RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.

Specifications - SFP DDMI: yes
- CPU nominal frequency: 600 MHz
- CPU core count: 1
- Size of RAM: 128 MB
- 10/100 Ethernet ports: None
- 10/100/1000 Ethernet ports: 8
- MiniPCI slots: 0
- MiniPCI-e slots: 0
- Wireless chip model: AR9344-DC3A-R
- Wireless standards: 802.11b/g/n
- Number of USB ports: 1
- Power Jack: 1
- 802.3af support: yes
- PoE out: No
- PoE in: Yes
- Supported input voltage: 8 V - 57 V
- Voltage Monitor: Yes
- PCB temperature monitor: Yes
- CPU temperature monitor: No
- Operating System: RouterOS
- Operating temperature range: -35C to +65C tested
- License level: 5
- Antenna gain DBI: 2.5
- Current Monitor: Yes
- CPU: AR9344-DC3A-R
- Max Power consumption: 13 W
- SFP ports: 1
- SFP+ ports: None
- USB slot type: microUSB type AB
- Number of chains: 2
- Serial port: RJ45
- Dimensions: 200 x 145 x 45mm

R 2635,00 Add
MikroTik CRS112 Cloud Switch Desktop SFP

MikroTik CRS112 Cloud Switch Desktop SFP

Scoop's RB-CRS112SIN, Cloud Router Switch RB-CRS112-8G-4S-IN, by MikroTik RouterBOARD is a “small sized, low cost” member of MikroTik's CRS series. It comes with eight Gigabit Ethernet ports and four SFP cages.
The CRS series combines the best features of a fully functional router and a Layer 3 switch, while being powered by RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if required, ports can be removed from the switch configuration, and used for routing purposes.

Specifications - CPU nominal frequency: 400 MHz
- CPU core count: 1
- Size of RAM: 128 MB
- 10/100 Ethernet ports: None
- 10/100/1000 Ethernet ports: 8
- MiniPCI slots: 0
- MiniPCI-e slots: 0
- Number of USB ports: 0
- Power Jack: 1
- PoE in: Yes
- PoE out: No
- Supported input voltage: 10 V - 57 V
- Voltage Monitor: Yes
- PCB temperature monitor: Yes
- CPU temperature monitor: No
- Operating System: RouterOS
- Operating temperature range: -30C to +70C
- License level: 5
- Current Monitor: Yes
- CPU: QCA8511-AL1C
- Max Power consumption: 13.5W
- SFP ports : 4
- SFP+ ports: 0
- Serial port: RJ45
Dimensions: 200 x 143 x 44mm

R 2465,00 Add
MikroTik CRS125 Cloud Switch Rack Mount SFP

MikroTik CRS125 Cloud Switch Rack Mount SFP

Scoop's Cloud Router Switch by MikroTik RouterBoard is a fully functional Layer 3 switch, and is powered by RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.
Perfect SOHO gateway router, switch, all in one box:
- Ethernet, Fiber, or 4G (optional USB modem) gateway connection to Internet
- RouterOS gateway/firewall/VPN router with passive cooling
- Up to twenty-five Gigabit switch ports (1xSFP and 24xRJ45)

Box includes: Cloud Router Switch, 1U rackmount enclosure, power supply

Specifications - CPU nominal frequency: 600MHz
- CPU core count: 1
- Architecture: MIPS-BE
- Size of RAM: 128MB
- 10/100 Ethernet ports: 0
- 10/100/1000 Ethernet ports: 24
- MiniPCI slots: 0
- Number of USB ports: 1
- Power Jack: 8-28V DC
- Voltage Monitor: yes
- CPU temperature monitor: yes
- PCB temperature monitor: yes
- Operating System: RouterOS
- Temperature range: -35C to +65C tested
- License level: L5
- CPU: Qualcomm Atheros AR9344
- SFP ports: 1
- USB slot type: microUSB
- Dimensions: 443 x 142 x 44mm

R 2795,00 Add
MikroTik CRS212 Cloud Switch Desktop SFP

MikroTik CRS212 Cloud Switch Desktop SFP

Scoop's Cloud Router Switch, RB-CRS212-10S+, by MikroTik RouterBOARD is a cost effective version of the CRS series. It comes with one Gigabit Ethernet RJ45 port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel and serial port (RJ45). It includes an indoor desktop case and power supply.
It combines the best features of a fully functional router and a Layer 3 switch, and is powered by RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.

Specifications - CPU nominal frequency: 400 MHz
- CPU core count: 1
- Size of RAM: 64 MB
- 10/100 Ethernet ports: None
- 10/100/1000 Ethernet ports: 1
- MiniPCI slots: 0
- MiniPCI-e slots: 0
- Number of USB ports: 0
- Power Jack: 1
- PoE out: No
- PoE in: No
- Supported input voltage: 8 V - 30 V
- Voltage Monitor: Yes
- PCB temperature monitor: Yes
- CPU temperature monitor: No
- Operating System: RouterOS
- Operating temperature range: 35C to +65C tested
- License level: 5
- Current Monitor: Yes
- CPU: QCA8519-AC2C
- Max Power consumption: 20W
- SFP ports: 10
- SFP+ ports: 1
- Serial port: RJ45
- Dimensions: 200 x 144 x 47mm

R 3775,00 Add
MikroTik Fiber to Copper Converter

MikroTik Fiber to Copper Converter

Scoop's RB-FTPC, (the FTC) by MikroTik RouterBOARD is a Fiber to Copper converter. Unlike many other media converters available on market, FTC has an outdoor waterproof case with lock screw.
The device supports 12-57V PoE with 802.3af/at. It is supplied with a PoE injector and power supply. The case has a mounting system that is secured by a screw from inside the lockable case, making the device hard to access by unauthorised individuals.

Specifications - Power: 12-57V Passive or 802.3af PoE
- Operating temperature: -40 to +70C
- Ethernet: One 10/100/1000 Mbit Ethernet connector with PoE input support
- SFP: One 1.25Gbit port (SFP module not included)
- Outdoor: Fully weather proof wall/pole/din mounting
- Supports 1.25G 1000Base-X fiber to FE/GigE copper
- Dimensions: 185 x 85 x 30 mm

R 695,00 Add
MikroTik hEX PoE 5xGE 4xPoE 1xSFP ROS L4

MikroTik hEX PoE 5xGE 4xPoE 1xSFP ROS L4

MikroTik RouterBoard's hEX PoE is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. This powerful 800MHz CPU is a cost effective, small, easy to use and capable of all the advanced configurations supported by RouterOS. Maximum current is 1A per port and the Ethernet ports are shielded.
Includes 24v PSU

Specifications CPU nominal frequency: 800 MHz
CPU core count: 1
Size of RAM: 128 MB
10/100/1000 Ethernet ports: 5
Number of USB ports: 1
Power Jack: 1
Supported input voltage: 12 V - 57 V
PoE in: 802.3at
PoE out: 802.3at
Voltage Monitor: Yes
PCB temperature monitor: Yes
Tested ambient temperature: -40 + 70 C
License level: 4
CPU: QCA9557
Max Power consumption: 9W
SFP ports: 1
USB Power Reset: Yes
USB slot type USB type A Storage type FLASH Storage size 16 MB Includes 24v PSU

R 1395,00 Add
MikroTik hEX PoE Lite 5xFE 4xPoE Out ROS L4

MikroTik hEX PoE Lite 5xFE 4xPoE Out ROS L4

MikroTik RouterBOARD's hEX PoE lite is a small five port Ethernet router in a plastic case, with a USB 2.0 port and PoE output.

Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about. The maximum current is 1A per port and the Ethernet ports are shielded. Affordable, small and easy to use - Ideal for any SOHO environment.

Specifications - MikroTik Product code: RB750UPr2
- CPU nominal frequency: 650 MHz
- CPU core count: 1
- Size of RAM: 64 MB
- 10/100 Ethernet ports: 5
- Number of USB ports: 1
- Power Jack: 1
- Supported input voltage: 6 V - 30 V
- PoE in: Yes
- PoE out: Yes
- Voltage Monitor: Yes
- PCB temperature monitor: Yes
- Dimensions: 113 x 89 x 28mm
- Operating System Router: OS
- Operating temperature range: -30 + 70 C
- License level: 4
- Current Monitor: Yes
- CPU: QCA9531
- Max Power consumption: 3W
- USB slot type: USB type A
- Storage type: FLASH
- Storage size: 16 MB

R 1075,00 Add
Mikrotik Rack Mount Gigabit Cloud Router Switch - CRS326-24G-2S+RM

Mikrotik Rack Mount Gigabit Cloud Router Switch - CRS326-24G-2S+RM

Mikrotik' s CRS326-24G-2S+RM is a rack-mountable, 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity and several switching features and can be powered by SwOS or RouterOS. It has an additional CPU unit (With limited processing power) that allows customers to run the full RouterOS operating system on this device.
It gives you all the basic functionality of a managed switch, plus more, such as the ability to manage port-to-port forwarding, apply MAC filters, configure VLANs, mirror traffic, apply bandwidth limitations and even adjust some MAC and IP header fields. The SFP cages support both 1.25 Gb SFP and 10 Gb SFP+ modules.

Specifications RAM: 512 MB
Storage type: Flash, 16 MB
Switch chip model: 98DX3236A1
10/100/1000 Ethernet ports: 24
SFP+ cages: 2
Operating system: SwOS /RouterOS (Dual boot)
Supported input voltage: 9 - 30 V (jack or passive PoE)
Operating temperature: -40°C .. +60°C tested
Max power consumption: 24 W
Serial port: RJ45
Dimensions: 440 x 144 x 44 mm

R 3495,00 Add
Mikrotik Rack Mount Gigabit Router - RB1100Dx4

Mikrotik Rack Mount Gigabit Router - RB1100Dx4

MikroTik's RB1100AHx4 Dude Edition uses a quad core Cortex A15 chip from Annapurna labs, an Amazon company. The chip is clocked at 1.4GHz, for a maximum throughput of up to 7.5Gbit. The unit features several high speed storage connectors (two SATA and two M.2) for using a Dude database, proxy cache or any other storage intensive feature. It includes a 60GB M.2 drive and comes with Dude package already installed to work out-of-the box.
The RB1100AHx4 supports IPsec hardware acceleration and is faster at it than any previous RouterBOARD device. It features two IEC failover power connectors, supports passive or 802.3at/af PoE input and has a DC telecom power connector for -48V DC powering. It uses passive cooling and is absolutely quiet.

Unit comes with 1U rack-mount case, 13x Gigabit Ethernet ports, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support). It includes a 60GB M.2 drive already installed.

Specifications CPU nominal frequency: 1.4 GHz
CPU core count: 4
Size of RAM: 1 GB
10/100/1000 Ethernet ports: 13
Power Jack: 2
PoE in: 802.3af/at
Supported input voltage: 20 V - 57 V
Voltage Monitor: Yes
PCB temperature monitor: Yes
Operating System: RouterOS
License level: 6
Current Monitor: Yes
CPU: AL21400-1400-A0-E-1AN-8-C
Max Power consumption: 25W
Serial port: RS232
Storage type: NAND
Storage size: 128 MB
CPU Threads count: 4
SATA ports: 2x SATA3
M.2 slots: 2
Extended storage: 60GB M.2 SSD included
Dimensions: 444 x 148 x 47 mm

R 6195,00 Add
MikroTik RB2011iLIN Desktop 5xFE 5xGE

MikroTik RB2011iLIN Desktop 5xFE 5xGE

Scoop's RB-2011ILIN by MikroTik RouterBoard is a low cost multi-port device, designed for indoor use and available in many different cases.
The RB-2011ILIN is a basic model, with five Gigabit Ethernet ports, five Fast Ethernet ports, power jack and PoE support. It comes in a metal indoor case and is powered by the new Atheros next generation 600MHz 74K MIPS network processor. It features 64MB of RAM and a Level4 RouterOS licence.

Specifications - CPU: Atheros AR9344 600MHz
- CPU speed: 600MHz
- Memory: 64MB DDR SDRAM onboard memory
- Data Storage: NAND memory chip
- Ethernet: 5x 10/100 Mbit Fast Ethernet ports with Auto-MDI/X
- Ethernet: 5x 10/100/1000 Mbit Gigabit Ethernet ports with Auto-MDI/X
- Extras: Reset button, Reset jumper
- LEDs: Power, User, Ethernet activity
- Power options: Jack8-28V DC; PoE: 8-28V DC on Ether 1 (Non 802.3af)
- Max Power consumption: 6W max
- RAM: 64MB
- Architecture: MIPS-BE
- MiniPCI: No
- Integrated Wireless: No
- Temperature range: -30ºC...+70ºC
- Operating System: MikroTik RouterOS, L4 licence
- RouterOS License: L4
- Dimensions (mm): Desktop: 230 x 90 x 25, Rackmount: 443 x 92 x 44

R 1795,00 Add
MikroTik RB2011iLRM Rack Mount 5xFE 5xGE

MikroTik RB2011iLRM Rack Mount 5xFE 5xGE

Scoop's RB-2011ILRM by MikroTik RouterBoard is a low cost, multi-port device series. Designed for indoor use, and powered by RouterOS, a fully featured routing operating system.
Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.

It includes a power injector on Ethernet port 10 - it can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about!

Maximum load on the port is 500mA. It's powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports and five Fast Ethernet ports.

RouterBOARD 2011iRM comes with 1U rack mount enclosure and power supply.

Specifications - CPU speed: 600MHz
- Architecture: MIPS-BE
- RAM: 64MB
- Ethernet Ports: 10
- Gigabit: 5
- MiniPCI: 0
- Integrated Wireless: No
- PoE : 8-30V
- Voltage Monitor: No
- CPU temperature monitor: No
- PCB temperature monitor: No
- Temperature range: -35C to +65C
- RouterOS License: L4
- Current Monitor: No
- CPU: Atheros AR9344
- Max Power consumption: 6W

R 1795,00 Add
MikroTik RB2011iLSIN Desktop 10xEthernet 1x SFP

MikroTik RB2011iLSIN Desktop 10xEthernet 1x SFP

Scoop's RB-2011ILSIN by MikroTik RouterBoard has a SFP cage for gigabit SFP transceivers and is ideal for FTTH (Fiber To The Home) implementations.

Note that SFP transceiver is NOT included. The RB-2011ILSIN supports any 1.25G SFP transceiver that is within the SFF Committee specifications for SFP Transceivers. It does not have hardware support for PON (Passive Optical Network).

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included). It is powered by an Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license.

There is PoE output function for port number 10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. RouterBOARD 2011iLS-IN comes with desktop enclosure and power supply.

Specifications - CPU nominal frequency: 600 MHz
- SFP DDMI: Yes
- CPU core count: 1
- Size of RAM: 64 MB
- Architecture: MIPS-BE
- 10/100 Ethernet ports: 5
- 10/100/1000 Ethernet ports: 5
- MiniPCI slots: 0
- MiniPCI-e slots: 0
- Wireless standards: None
- Number of USB ports: 0
- Power Jack: 1
- Supported input voltage: 8 V - 30 V
- PoE in: Yes
- PoE out: Yes
- Voltage Monitor: No
- PCB temperature monitor: No
- CPU temperature monitor: No
- Operating System: RouterOS
- Operating temperature range: -35C to +65C
- License: Level 4
- Antenna gain DBI: No
- Current Monitor: No
- CPU: AR9344
- Max Power consumption: 6W
- SFP ports: 1
- SFP+ ports: 0
- Number of chains: 0
- Serial port: None

- Dimensions: 214mm x 86mm

R 1975,00 Add
MikroTik RB2011UiAS2HnDIN Desktop WiFi and SFP

MikroTik RB2011UiAS2HnDIN Desktop WiFi and SFP

Scoop's RB-2011S2IN by MikroTik RouterBOARD is powered by an Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included).
It also features powerful (up to 1W) dual chain 2.4Ghz 802.11bgn wireless, a RJ45 serial port, microUSB port and RouterOS L5 license, as well as a desktop case with power supply, two 4dBi Omni antennas and LCD panel.

Specifications - Antenna gain: 4dbi
- TX power: 30dBm
- Current Monitor: No
- CPU: Atheros AR9344
- Max Power consumption: 11W
- SFP ports: 1
- CPU speed: 600MHz
- RAM: 128MB
- LAN ports: 5
- Gigabit: 5
- MiniPCI: 0
- Integrated Wireless: yes
- Wireless standards: 802.11b/g/n
- USB: microUSB
- Power Jack: 8-28V DC
- 802.3af support: No
- PoE : 8-28V DC on Ether1
- Voltage Monitor: Yes
- PCB temperature monitor: Yes
- CPU temperature monitor: No
- Operating System: RouterOS
- RouterOS License: L5
- Dimensions: 214mm x 86mm for PCB

R 2250,00 Add
MikroTik RB2011UiASRM Rack Mount SFP

MikroTik RB2011UiASRM Rack Mount SFP

Scoop's RB-2011UIASRM by MikroTik RouterBOARD comes with 1U rack-mount enclosure, LCD panel and power supply.
The RB-2011UIASRM, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has a RJ45 serial port, microUSB port and more RAM (128MB instead of 64MB). It also has a RouterOS L5 license (instead of L4) as well as a touchscreen LCD for configuration. An SFP cage is also present - (SFP module not included)

Specifications - Current Monitor: No
- CPU: Atheros AR9344
- Max Power consumption: 6W
- CPU speed: 600MHz
- SFP ports: 1
- RAM: 128MB
- LAN ports: 5
- Gigabit: 5
- MiniPCI: 0
- Integrated Wireless: No
- USB: microUSB
- Power Jack: 8-28V DC
- 802.3af support: No
- PoE: 8-28V DC on Ether1
- Voltage Monitor: Yes
- PCB temperature monitor: Yes
- CPU temperature monitor: No
- RouterOS License: L5
- Dimensions: 214mm x 86mm for PCB

R 1995,00 Add
MikroTik RB3011UiASRM Rack Mount SFP

MikroTik RB3011UiASRM Rack Mount SFP

Scoop's RB-3011UIASRM by MikroTik RouterBoard is a multi-port device which runs an ARM architecture CPU for higher performance. The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and a SuperSpeed full size USB 3.0 port, for adding storage or an external 3G/4G modem. The unit features a 1U rack-mount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port.

Specifications - CPU nominal frequency: 1.4 GHz
- CPU core count: 2
- Size of RAM: 1 GB
- 10/100/1000 Ethernet ports: 10
- Switch chip model: QCA8337-AL3C-R
- Power Jack: 1
- PoE in: Yes (passive only)
- PoE out: Yes (port 10)
- Supported input voltage: 10 V - 30 V
- Voltage Monitor: Yes
- PCB temperature monitor: Yes
- License level: 5
- Operating System: RouterOS
- CPU: IPQ-8064
- Max Power consumption: 10 W

- Dimensions: 443 x 92 x 44mm

R 3125,00 Add
MikroTik RB433UL 400Mhz 64MB 3xFE 3xWiFi Slots

MikroTik RB433UL 400Mhz 64MB 3xFE 3xWiFi Slots

Scoop's RB-433UL by MikroTik RouterBoard, has three miniPCI slots, three Ethernet ports and one USB port for storage or a 3G modem.
Use this device in an outdoor case for a sector AP installation, or for a wireless point to point link. It is powered by an Atheros 400MHz CPU, has 64MB of RAM and a Level4 RouterOS license.

Specifications - CPU speed: 400Mhz
- SFP DDMI: 0
- CPU cores: 1
- RAM: 64MB
- LAN ports: 3
- Gigabit: no
- MiniPCI: 3
- miniPCI-e: no
- Integrated Wireless: no
- USB: 1
- Power Jack: yes
- 802.3af support: no
- PoE : 8-28V DC on Ether1
- Voltage Monitor: No
- PCB temperature monitor: No
- CPU temperature monitor: No
- Operating System: RouterOS
- RouterOS License: L4
- Current Monitor: No
- Max Power consumption: 2W board only, 14W available to minIPCI cards
- SFP ports: 0
- Dimensions: 105 x 154mm

R 1535,00 Add
MikroTik RB493G 680Mhz 256MB 9xGE 3xWiFi Slots

MikroTik RB493G 680Mhz 256MB 9xGE 3xWiFi Slots

Scoop's RB-493G by MikroTik RouterBoard has nine Gigabit Ethernet ports and three miniPCI slots. It also features a switch chip, so the Ethernet ports of your choice can be grouped together to act as a switch.
The RB493G also has a USB 2.0 port and a microSD card slot, providing additional storage potential or a 3G USB modem for backup connectivity. The heart of this device is a high performance Atheros AR7161 CPU and it features 256MB of built-in RAM.

RB493G includes RouterOS - the operating system that will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager.

Specifications - CPU: Atheros AR7161 680MHz
- Memory: 256MB DDR SDRAM onboard memory
- Boot Loader: RouterBOOT
- Data storage: 128MB onboard NAND memory chip
- Ethernet: Nine 10/100/1000 Mbit/s Fast Ethernet ports with Auto-MDI/X
- MiniPCI: Three miniPCI slots
- Extras: One USB 2.0 port (needs power adapter, available separately)
- Serial port: One DB9 RS232C synchronous serial port
- LEDs: Power, NAND activity, 5 user LEDs
- Power options: PoE: 10..28V DC (except power over data lines)
- Power jack: 10..28V DC
- Power consumption: ~3W without extension cards, maximum - 16 W
- Architecture: MIPS-BE
- Operating System: MikroTik RouterOS v4, Level5 licence
- Temperature range: -30ºC to +60ºC
- Dimensions (mm): 105 x 160
- Weight: 189g

R 3415,00 Add
Mikrotik RB750Gr3 5 Gigabit Port SOHO Router

Mikrotik RB750Gr3 5 Gigabit Port SOHO Router

Scoop's RB-HEX by MikroTik RouterBOARD is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a full size USB port, affordable, small and easy to use. It features a very powerful dual core 880MHz CPU and 256MB RAM, capable of all the advanced configurations supported by RouterOS.
IPsec Hardware encryption (~470Mbps) and dude server package is also supported. It's microSD slot provides improved r/w speed for database storage on a microSD card.

Specifications CPU nominal frequency: 880 MHz
CPU core count: 2
Size of RAM: 256 MB
10/100/1000 Ethernet ports: 5
Number of USB ports: 1
Power Jack: 1
Supported input voltage: 8 V - 30 V
PoE in: Yes
Voltage Monitor: Yes
PCB temperature monitor: Yes
Operating System: RouterOS
Tested ambient temperature: -30 + 70 C
CPU: MT7621A
Max Power consumption: 5W
USB slot type: USB type A
USB Power Reset: Yes
Storage type: FLASH
Storage size: 16 MB
CPU Threads count: 4
Dimensions: 113 x 89 x 28mm

R 1025,00 Add
MikroTik RB-750r2 850MHz Desktop 5xFE SOHO Router

MikroTik RB-750r2 850MHz Desktop 5xFE SOHO Router

Scoop's RB-750R2 (hEX lite), by MikroTik RouterBOARD is a small five port ethernet router in a practical plastic case. It is well priced and the perfect choice when it comes to managing your wired home network.
No more compromise between price and features - RB750r2 has both. With its compact design and clean looks, it will fit perfectly into any SOHO environment.

Specifications - CPU nominal frequency: 850 MHz
- CPU core count: 1
- Size of RAM: 64 MB
- Architecture: MIPS-BE
- 10/100 Ethernet ports: 5
- 10/100/1000 Ethernet ports: None
- MiniPCI slots: 0
- MiniPCI-e slots: 0
- Number of USB ports: 0
- Memory Cards: 0
- Power Jack: 1
- 802.3af support: No
- PoE in: Yes
- PoE out: No
- Supported input voltage: 6 V - 30 V
- Voltage Monitor: No
- CPU temperature monitor: No
- PCB temperature monitor: No
- Operating System: RouterOS
- Operating temperature range: -40℃ to +55℃
- Antenna gain DBI: No
- Current Monitor: No
- CPU: QCA9531-BL3A-R
- Max Power consumption: 2W
- SFP ports: 0
- SFP+ ports: 0
- Number of chains: 0
- Serial port: None
- Dimensions: 113 x 89 x 28mm
- Weight: 129g (without packaging and cables)

R 755,00 Add
MikroTik RJ45 SFP Gigabit Ethernet Module

MikroTik RJ45 SFP Gigabit Ethernet Module

Scoop's SFP-RJ45 by MikroTik RouterBOARD, is a RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices

Specifications - Data Rate: 1.25Gbps
- Distance: 100m
- Data Rate: 1.25Gbps
- Operating Temperature: 0 C +85 C

R 500,00 Add
MikroTik Single Mode SFP LX 1310nm 20km

MikroTik Single Mode SFP LX 1310nm 20km

Neatly expand coverage and boost bandwidth of your medium or large network with Scoop's SFP-SM, single mode fibre module, by MikroTik. It is fully IEEE802.3z compliant and operates in 1310nm. With it's compact size, it fits nicely into a multitude of switches that have an SFP interface.

Specifications - Data Rate: 1.25G
- Distance: 20km
- Mode: SM
- Wavelength: 1310nm
- Connector: Dual LC
- Format: SFP

R 395,00 Add
Tenda 16-Port Fast Ethernet Rack Mount Switch

Tenda 16-Port Fast Ethernet Rack Mount Switch

Tenda's TEF1016D, 16-Port 10/100 Switch is designed to provide a simple, cost-effective solution for expanding a SMB, school or campus network. Connect this 16-port switch to a router and add up to twenty three more computers or other Ethernet-based devices such as a printer, Network-Attached Storage (NAS), or Internet camera to increase the functionality of your network. Housed in sturdy metal case, it is ideal for years of dependable use.
With it's 100-Mbps speed, a switching capacity of up to 3.2Gbps and non-blocking wire speed forwarding, the TEF1016D meets the performance requirements for a high-speed, reliable network.

Specifications Standards & Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
PowerOutput: 20W
Input VoltageAC: 100~240V; 50/60Hz
Dimensions: 441mm x 122mm x 44mm (L x W x H)
Forwarding ModeStore and Forward Switching Capacity: 3.2Gbps
MAC Address Table: 4K
Port: 16 x 10/100M Base-T Ethernet ports (Auto MDI/MDIX)
Package ContentTEH1600M Operating Temperature: 0℃ ~ 40℃
Storage Temperature: -40℃ ~ 70℃
Operating Humidity: 10% ~ 90%RH non-condensing
Storage Humidity: 5% ~ 90%RH non-condensing
Standard 13/19 inch rack-mountable
6000V lightning protection for power supply

R 550,00 Add
Tenda 16-Port Gigabit Rack Mount Switch

Tenda 16-Port Gigabit Rack Mount Switch

Tenda's TEG1016D is a 16-Port, Gigabit, rack-mount switch. With it's Broadcom StrataConnect-series integrated Silicon chip, which is based on ARM-high performance, this unmanaged Gigabit Switch can be applied according to the user's required advanced Gigabit applications. It features 16 10/100/1000M Ethernet ports and is compatible with IEEE 802.3az standards. It's front and back radiators ensures reliability even in extreme temperatures.

Specifications Standards & Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Transmission Media: 10Base-T: Cat. 3 UTP or better
Power Output: 20W
Input Voltage: AC:100~240V; 50/60Hz
Dimensions: 280mm x 179mm x 44mm (L x W x H)
Forwarding Mode: Store and Forward
Switching Capacity: 32Gbps
MAC Address Table: 8K
Port: 16 x 10/100/1000M Base-T Ethernet ports (Auto MDI/MDIX)
Operating Temperature: 0℃ ~ 40℃
Storage Temperature: -40℃ ~ 70℃
Operating Humidity: 10% ~ 90%RH non-condensing
Storage Humidity: 5% ~ 90%RH non-condensing

R 1040,00 Add
Tenda 24 Port 2 Uplink Smart PoE Switch 370W

Tenda 24 Port 2 Uplink Smart PoE Switch 370W

Tenda's TEF1226P, PoE switch is ideal for use in a wireless-monitoring type network where long-distance transmission is required. Today's monitoring environments can be complex with varied camera distance length to the main terminal ranging from just a few meters up to hundreds of meters, often resulting in inadequate network transmission. The TEF1226P PoE monitoring switch features exclusive patented 8-pin professional network extension technology and can support up to 250 meters for the transmission of data.
It provides protection against PSE short-circuiting, PoE overloading, power over temperature, over voltage and surge current. It also features 6Kv lightning protection.
440W PSU of which 370W is for PoE.

Specifications Standard & Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1D, IEEE 802.1W, IEEE 802.1Q, IEEE 802.3af, IEEE 802.3at
MTBF: 100,000 hours
LED: Link/Act, PoE Status, System, Power, PoE Max
Interface: Fixed Ports: 24 10/100Base-TX ports
Interface: 2x 10/100/1000Base-T ports
Interface: 2x 1000Base-X SFP ports Combo
Lightning protection: ≥6KV
Store and forward: Yes
Exchange capacity: 8.8 Gbit/s
MAC address entries: 4K MAC
Power
Power supply module: Providing 24 ports under IEEE 802.3af (15.4W) or 24 ports under IEEE 802.3at (30W)
PoE through pin:1 2 4 5 +,3 6 7 8 -
Voltage input range: AC:100-240V~ 50/60Hz
Power Consumption: <450W
PoE consumption: up to 370W
440W PSU of which 370W is for PoE

Operating temperature: 0 ℃~40 ℃
Storage temperature: -40 ℃~70 ℃
Humidity Operational: 10%~95% (noncondensing)
Humidity Storage: 10%~95% (noncondensing)
Dimensions: 440mm x 284mm x 44mm
Weight: ≤5kg

R 4695,00 Add
Tenda 24-Port Fast Ethernet Rack Mount Switch

Tenda 24-Port Fast Ethernet Rack Mount Switch

Tenda's TEF1024D, 24-Port 10/100 Switch is designed to provide a simple, cost-effective solution for expanding a SMB, school or campus network. Connect this 24-port switch to a router and add up to twenty three more computers or other Ethernet-based devices such as a printer, Network-Attached Storage (NAS), or Internet camera to increase the functionality of your network. Housed in sturdy metal case, it is ideal for years of dependable use.
With it's 24 Autosensing 10/100Mbps switched ports with auto MDI/MDI-X crossover detection and up to 200Mbps full duplex bandwidth on each port, the TEF1024D meets the performance requirements for a high-speed, reliable network. Also fully compliant with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX

Specifications Standards & Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
PowerOutput: 20W
Input VoltageAC: 100~240V; 50/60Hz
Dimensions: 441mm x 122mm x 44mm (L x W x H)
Forwarding Mode: Store and Forward
Switching Capacity: 4.8Gbps
MAC Address Table: 4K
Port: 24 x 10/100M Base-T Ethernet ports (Auto MDI/MDIX)
Package ContentTEH1600M Operating Temperature: 0℃ ~ 40℃
Storage Temperature: -40℃ ~ 70℃
Operating Humidity: 10% ~ 90%RH non-condensing
Storage Humidity: 5% ~ 90%RH non-condensing
Standard 13/19 inch rack-mountable
6000V lightning protection for power supply

R 655,00 Add
Tenda 2-Port Gigabit Wi-Fi Powerline Extender

Tenda 2-Port Gigabit Wi-Fi Powerline Extender

Tenda's PA6 powerline extender gives you the ability to create a fast home network using the electrical wiring in your house. This means you can take your Internet around your house without losing much performance. Creating a powerline home network is as easy as plugging the PA6 into a power socket to access stable, high-speed data transfer rates of up to 1000Mbps via powerline and up to 300Mbps wireless transmission rate via it's two Gigabit Ethernet ports for wired devices like smart TV's and gaming consoles - Ideal for HD Video Streaming, large file transfers and other high-bandwidth applications.


SKU PA6
Manufacturer Product Code PA6
Download
Type Approval
Specifications Speed: Powerline 1000Mbps, Wi-Fi 300Mbps
Standards & Protocol: HomePlugAV2, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE802.11 b/g/n
Interface: 2 x 10/100/1000M (Ethernet Interfaces)
Antenna: 2 x Extender 2.5dBi antennas
Buttons: 1 x Wi-Fi Clone, 1 x Pair, 1 x Reset
LEDs: 1 x Powerline, 1 x Wi-Fi
Power Consumption: Maximum: 8.9W (220V/50Hz), Standby: 5.5W (220V/50Hz)
Power Input: AC 100~240V 50/60Hz 0.1A
Frequency Powerline: 2-86MHz
Frequency Wireless: 2.4~2.4835GHz
Operating Temperature: 0°C ~ 40°C
Storage Temperature: -40°C ~ 70°C
Operating Humidity: 10% ~ 90% RH non-condensing
Storage Humidity: 5% ~ 90% RH non-condensing
Dimensions: 120mm x 63mm x 42mm

R 850,00 Add
Tenda 5-Port Gigabit Ethernet Desktop Switch

Tenda 5-Port Gigabit Ethernet Desktop Switch

Tenda's SG105 a 5-Port Gigabit Desktop SOHO switch. It has five (5) 10/100/1000Mbps auto-negotiation ports, with which to establish a LAN network. It features enhanced transmission speed and eliminates possible transmission bottlenecks. It is easy to sue and ideal for school dormitories, small offices, home offices and video surveillance.

Specifications Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab
Interface: 5 x 10/100/1000M auto-negotiation RJ45 ports (Auto MDI/MDIX)
Transmission Media: Recommend Cat.5e UTP or better (<100 meters )
Forwarding Speed 10Mbps: 14880pps
Forwarding Speed 100Mbps: 148800pps
Forwarding Speed 1000Mbps: 1488000pps
Power Supply Input: AC:100-240V; 50/60Hz
Power Supply Output: 5.0V 0.6A ( External Power Adapter )
Dimensions: 93 x 66 x 23mm
LEDs: 1 x Power, 5 x Link/Act
Switching Capacity: 10Gbps
MAC Address Table: 4K
Power Consumption Maximum : 1.7W (5V DC)
Transfer Method: Store and Forward
Access Control: CDMA/CD
MAC Address Learning: Automatic update
Operating Temperature: 0℃~40℃
Storage Temperature: -40℃~70℃
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

R 250,00 Add
Tenda 5xFE Switch Extender 4x 802.3af/at PoE

Tenda 5xFE Switch Extender 4x 802.3af/at PoE

Scoop’s TEF1105P by Tenda is a 5-port 10/100Mbps unmanaged switch that requires no configuration and provides 4 PoE ports. It can automatically detect and supply power to all IEEE 802.3af/at-compliant Powered Devices (PDs).

Specifications - Standard & Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
- Interface: 5x 10/100Mbps auto-negotiation ports, port1 to port4 support IEEE802.3 at/af PoE standard
- Network Media: 10BASE-TX: UTP category 5, 5e cable (≤250m) ; 100BASE-TX: UTP category 5, 5e cable (≤150m)
- Indicators: 5x Link/Act, 4x PoE Status, 1x Power, 1x 100Mbps
- Input Power: External Power Supply: DC: 51V/1.25A
- Power Consumption: 2 Watts (max. no PD connected) ; 63 Watts (max. with 58W PD connected)
- PoE Total Power: 58W
- Forwarding Mode: 10BASE-T: 14880pps/port; 100BASE-TX: 148800pps/port
- Back-Pressure for Half Duplex mode: Up to 1Gbps
- Mounting: Desktop or Wall mount - MAC Address Table: 1K
- Transmission mode: Store-And-Forward
- Temperature: -10ºC ~ 45ºC
- Humidity: 10%-90%RH (non-condensing)

- Dimensions: 100mm x 100mm x 26mm (L x W x H)
- Weight: <2kg

R 475,00 Add
Tenda 8-Port Gigabit Ethernet Desktop Switch

Tenda 8-Port Gigabit Ethernet Desktop Switch

Tenda's SG108 a 8-Port Gigabit Desktop SOHO switch. It has eight (8) 10/100/1000Mbps auto-negotiation ports, with which to establish a LAN network. It features enhanced transmission speed and eliminates possible transmission bottlenecks. It is easy to use and ideal for school dormitories, small offices, home offices and video surveillance.

Specifications Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab
Intertface: 8 x 10/100/1000M auto-negotiation RJ45 ports (Auto MDI/MDIX)
Transmission Media: Recommend Cat.5e UTP or better (<100 meters )
Forwarding Speed 10Mbps: 14880pps
Forwarding Speed 100Mbps: 148800pps
Forwarding Speed 1000Mbps: 1488000pps
Power Supply Input: AC:100-240V; 50/60Hz
Power Supply Output: 9.0V 0.6A ( External Power Adapter )
Dimensions: 142 x 90 x 24mm
LEDs: 1 x Power, 8 x Link/Act
Switching Capacity: 16Gbps
MAC Address Table: 4K
Power Consumption Maximum : 4W (9V DC)
Transfer Method: Store and Forward
Access Control: CDMA/CD
MAC Address Learning: Automatic update
Operating Temperature: 0℃~40℃
Storage Temperature: -40℃~70℃
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

R 350,00 Add
Tenda 9xGE Desktop Switch 8x 802.3af/at PoE

Tenda 9xGE Desktop Switch 8x 802.3af/at PoE

Easily deploy and expand your network with Scoop's TEG1009P-EI, 9 port Gigabit Network Switch, with 8 PoE Ports, by Tenda.
The TEG1009P-EI provides 9 GE Base-T Ethernet ports. Ports 1-8 support IEEE802.3af PoE (15.4W) or 4 ports support 802.3at PoE (30W).

Power can be transmitted together with data via conventional Cat 5 twisted pair cable, for use with an AP's, IP Cameras or IP Phones. The device complies with 802.3az(EEE) standards, and is designed with a 9th uplink port for lightning protection, PoE dynamic power, low power consumption and is fan-less.

Specifications - Standards & Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
- Port Description: 8x 10/100/1000 Base-TX ports and x1 10/100/1000 Base-TX uplink port
- Supports IEEE802.3x flow control (half/full duplex)
- Supports port-based broadcast storm control
- Supports pps-based broadcast storm control
- Switching capacity Back-plane bandwidth: 19Gps
- Switching capacity Packet forwarding rate: 13.4Mbps
- Switching capacity Back-plane bandwidth: 19Gps -> 18Gbps
- MAC address table: 4K
- Switching mode: Store & Forward
- Power: DC Input
- Power consumption: <127.5W
- Maximum PoE Output power: 121.2W
- Power Module: PoE 802.af (15.4W), 802.3at (30W)
- Operating Temperature: 0℃~ 45 ℃
- Operating Humidity: 10% ~90% (Non condensing)
- Dimensions (L ×W×H ) 235mm x 103mm x 27mm
- Weight: <5Kg

R 1845,00 Add
Tenda Gigabit Ethernet Powerline Adapter

Tenda Gigabit Ethernet Powerline Adapter

The P3, by Tenda, is a Gigabit powerline and offers a solution when running cables or setting up a wireless connection within a building are not an option. With advanced HomePlug AV2 technology, the P3 provides a stable Gigabit connection via the power-lines in the building, giving you quick, easy network scalability. The unit can effectively transmit data up to 300 meters over power-lines.

Specifications Speed: Powerline 1000Mbps
Standards & Protocol: HomePlugAV2, IEEE 802.3,IEEE 802.3u,IEEE 802.3ab
Interface: 1 x 10/100/1000M
Modulation Technology: OFDM, CSMA/CA
Button: 1 x Pair/Reset, LED, Power, 1 x Powerline, 1 x Ethernet
Power Consumption Maximum: 3.2W (220V/50Hz)
Power Consumption Minimum: 0.36W (220V/50Hz)
Power Input: AC100~240V 50/60Hz 0.1A
Frequency: Powerline: 2-86MHz
Operating Temperature: 0°C ~ 40°C
Storage Temperature: -40°C ~ 70°C
Operating Humidity: 10% ~ 90% RH non-condensing
Storage Humidity: 5% ~ 90%RH non-condensing
Dimensions: 82mm x 60mm x 32mm

R 395,00 Add
Ubiquiti 12 Port SFP EdgeSwitch + 4 Gig Ethernet

Ubiquiti 12 Port SFP EdgeSwitch + 4 Gig Ethernet

Scoop's ES12-F, EdgeSwitch™ Fiber from Ubiquiti is a fully managed, Gigabit fiber switch, delivering robust performance and intelligent switching for high‑bandwidth networks. For fiber connectivity, the EdgeSwitch Fiber features 12 SFP ports, eight of which also support 100 Mbps. For copper connectivity, the EdgeSwitch Fiber offers four Gigabit RJ45 ports.
The EdgeSwitch Fiber simultaneously processes traffic on all ports at line rate without any packet loss. For its total, non‑blocking throughput, the EdgeSwitch Fiber supports up to 16 Gbps and uses a sophisticated operating system that provides advanced switching features, including VLAN tagging and link aggregation, and limited layer-3 features, including static routing and DHCP server functionality.

Specifications - Enclosure Characteristics: SGCC Steel
- Total Non-Blocking Throughput: 16 Gbps
- Switching Capacity: 32 Gbps
- Forwarding Rate: 23.81 Mpps
- Max. AC Power Consumption: 56W
- Power Method AC: 100-240VAC/50-60 Hz, Universal Input
- Power Method DC: DC 56W, 25 to 16V, with 2.5 mm / DC Power Inline Connector
- Supported Voltage Range: 100 to 240VAC 25 to 16VDC
- Power Supply: AC/DC, Internal, 56W DC
- LEDs Per Data Port: Speed/Link/Activity
- Networking Interfaces: (8) 100/1000 Mbps SFP Ethernet Ports
- Networking Interfaces: (4) 1000 Mbps SFP Ethernet Ports
- Networking Interfaces: (4) 10/100/1000 Mbps RJ45 Ethernet Ports
- Management Interface: (1) RJ45 Serial Port, Ethernet In/Out Band
- Rack-mount: Yes, 1U High
- ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV
- Operating Temperature: -5 to 40° C
- Operating Humidity: 5 to 95% Non-condensing
- Shock and Vibration: ETSI300-019-1.4 Standard

- Dimensions: 443 x 221 x 43 mm
- Weight (Rack-Mount Brackets Included): 2.68 kg
- Weight (Rack-Mount Brackets Excluded): 2.59 kg

R 3850,00 Add
Ubiquiti 16 Port Managed Gigabit + 2 SFP 150W PoE

Ubiquiti 16 Port Managed Gigabit + 2 SFP 150W PoE

Ubiquiti's US16-150, UniFi Switch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. It delivers robust performance over its 18 independent switching ports. Two SFP ports offer optical connectivity, and 16 Gigabit Ethernet ports offer 802.3af/at PoE+ or 24V passive PoE sharing, a total of 150W PoE. Place it on a desktop or mount on a wall or in a rack. The UniFi Switch integrates with the UniFi Controller software for centralised management of UniFi devices.

Specifications - Total Non-Blocking Throughput: 18 Gbps
- Switching Capacity: 36 Gbps
- Forwarding Rate: 26.78 Mpps
- Max. Power Consumption Including PoE Output: 150W
- Max. Power Consumption Excluding PoE Output: 28W
- Power Method: 100-240VAC/50-60 Hz, Universal Input
- Power Supply: AC/DC, Internal, 150W DC
- LEDs Per Port RJ45 Data Ports: PoE, Speed/Link/Activity
- LEDs Per Port SFP Data Ports: Speed/Link/Activity
- Networking Interfaces: (16) 10/100/1000 Mbps RJ45 Ethernet Ports
- Networking Interfaces: (2) 1 Gbps SFP Ethernet Ports
- Management Interface: Ethernet In-Band
- ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV
- Operating Temperature: -5 to 40° C
- Operating Humidity: 5 to 95% Non-condensing
- PoE Interfaces: POE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-)
- PoE Interfaces: 24VDC Passive PoE (Pins 4, 5+; 7, 8-)
- Max. PoE+ Wattage per Port by PSE: 34.2W
- Voltage Range 802.3at Mode: 50–57V
- Max. Passive PoE Wattage per Port: 17W
- 24V Passive PoE Voltage Range: 20-27V
- Dimensions: 443 x 43 x 221 mm
- Weight: 2.89 kg (Rack-Mount Brackets Included)

R 5695,00 Add
Ubiquiti 16Port EdgePoint Gigabit PoE Switch 2SFP

Ubiquiti 16Port EdgePoint Gigabit PoE Switch 2SFP

Ubiquiti's EP-R16 EdgePoint™ offers an innovative combination of robust routing performance, fiber back-haul capability, and the convenience of passive PoE support.
The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI). FiberProtect greatly improves data signal integrity, and consolidates the wired-data back-haul to a single fiber cable run for long-distance connectivity.

It's link-balancing routing feature provides redundancy for outdoor wireless links.

Specifications - Enclosure Characteristics: Diecast Aluminum Alloy and Polycarbonate with UV Resistance
- Max. Power Consumption: 40W (Excludes PoE Output)
- Power Input: (1) DC Terminal Block or (2) RJ45 (Ports 1 and 2)
- Power Input: Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs
- Power Supply: Min. 54V / 0.8A (Excludes PoE Output Power)
- VDC Input: 54VDC, 6A
- Passive PoE Input: (2) 54V/1.5A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, Ports 1 and 2
- Passive PoE Input: Do NOT Configure Port 1 or 2 in PoE Output Mode if You Are Using PoE Input Power Sources
- Passive PoE Output: (4) 54V or 24V /1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, Ports 1 to 4
- Passive PoE Output: (12) 802.3af/at or 24V/0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, Ports 5 to 16
- Power Monitoring: (1) DC Terminal Block, Input Power, (2) RJ45, Ports 1 and 2, PoE Input or Output Power, (14) RJ45, Ports 3 to 16, PoE Output Power
- Supported Voltage Range: 56 to 42VDC
- Button: Reset
- LED System: Power
- LED 1 to 16: Speed / Link / Activity, PoE
- LED SFP: Speed / Link / Activity
- Serial Console Port: (1) RJ45 Serial Port
- Data Ports: (16) 10/100/1000 RJ45 Ports, (2) 1/10 Gbps SFP+ Ports
- Processor: ARM Cortex-A9 400 MHz
- System Memory: 256 MB DDR3 RAM
- Code Storage: 32 MB
- Pole/Wall Mount: Yes
- Operating Temperature: -40 to 65° C
- Operating Humidity: 10 to 90% Non-condensing

- Dimensions: 326.6 x 382.7 x 88.8 mm
- Dimensions with wall-mount: 326.6 x 382.7 x 105.5 mm
- Weight: 3.4 kg
- Weight with wall-mount: 3.8 kg

R 8975,00 Add
Ubiquiti 24 Port EdgeSwitch Lite Managed Switch

Ubiquiti 24 Port EdgeSwitch Lite Managed Switch

Scoop's ES24- LITE, The EdgeSwitch™ Lite by Ubiquiti, simultaneously processes traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 26 Gbps for this fan-less, 24-port model. The EdgeSwitch™ Lite delivers robust performance and intelligent switching for growing networks.

The EdgeSwitch™ Lite supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.

Specifications - Total Non-Blocking Throughput: 26 Gbps
- Switching Capacity: 52 Gbps
- Forwarding Rate: 38.69 Mpps
- Max. AC Power Consumption: 25W
- Power Method AC: 100-240VAC/50-60 Hz, Universal Input
- Power Method DC: DC 25W, 25 to 16V, with 2.5 mm DC Power Inline connector
- Power Supply: AC/DC, Internal, 25W DC
- LEDs Per Port - Serial Console Port: N/A
- LEDs Per Port - RJ45 Data Ports: Speed/Link/Activity
- LEDs Per Port - SFP Data Ports: Speed/Link/Activity
- Networking Interfaces: (24) 10/100/1000 Mbps RJ45 Ethernet Ports
- Networking Interfaces: (2) 1 Gbps SFP Ethernet Ports
- Management Interface: (1) RJ45 Serial Port, Ethernet In/Out Band
- Rack-mount: Yes, 1U High
- ESD/EMP Protection: Air: ±24 kV, Contact: ±24 kV
- Operating Temperature: -5 to 40° C
- Operating Humidity: 5 to 95% Non-condensing
- Shock and Vibration: ETSI300-019-1.4 Standard

- Dimensions: 443 x 43 x 221 mm
- Weight: Rack-Mount Brackets Included 2.6 kg
- Weight: Rack-Mount Brackets Excluded 2.51 kg

R 3875,00 Add
Ubiquiti 24 Port Gigabit + SFP 250W PoE Switch

Ubiquiti 24 Port Gigabit + SFP 250W PoE Switch

Scoop's ES24-250 EdgeSwitch™ by Ubiquiti, delivers robust performance, PoE+ support and intelligent switching for growing networks.
The EdgeSwitch™ delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput of up to 26 Gbps for the 24-port models. It offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.

It also features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network.

Specifications - Total Non-Blocking Throughput: 26 Gbps
- Switching Capacity: 52 Gbps
- Forwarding Rate: 38.69 Mpps
- Max. Power Consumption: 250W
- Power Method: 100-240VAC/50-60 Hz, Universal Input
- Power Supply: AC/DC, Internal, 250W DC
- LEDs Per Port -RJ45 Data Ports: PoE, Speed/Link/Activity
- LEDs Per PortSFP Data Ports: Speed/Link/Activity
- Networking Interfaces: (24) 10/100/1000 Mbps RJ45 Ethernet Ports, (2) 1 Gbps SFP Ethernet Ports
- Management Interface: Ethernet In/Out Band
- Rack-mount: Yes, 1U High
- ESD/EMP Protection Air: ±24 kV, Contact: ±24 kV
- Operating Temperature: -5 to 40° C
- Operating Humidity: 5 to 95% Non-condensing
- Shock and Vibration: ETSI300-019-1.4 Standard
PoE Per Port
- PoE Interfaces: POE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-), 24VDC Passive PoE (Pins 4, 5+; 7, 8-)
- Max. PoE+ Wattage per Port by PSE: 34.2W
- Voltage Range: 802.3at Mode 50–57V
- Max. Passive PoE Wattage per Port: 17W
- 24V Passive PoE Voltage Range: 20-27V
- Dimensions: 485.04 x 44.45 x 285.6 mm
- Weight: 3.7 kg
- (24) Gigabit RJ45 ports
- (2) SFP ports
- Non-blocking throughput: 26 Gbps
- Switching capacity: 52 Gbps
- Forwarding rate: 38.69 Mpps
- Maximum power consumption: 250W
- Supports POE+ IEEE 802.3at/af and 24V Passive PoE
- Rackmountable

R 8125,00 Add
Ubiquiti 24 Port Gigabit + SFP 500W PoE Switch

Ubiquiti 24 Port Gigabit + SFP 500W PoE Switch

Scoop's ES24-500 EdgeSwitch™ by Ubiquiti, delivers robust performance, PoE+ support and intelligent switching for growing networks.
The EdgeSwitch™ delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput of up to 26 Gbps for the 24-port models. It offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.

It also features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network.

Specifications - Total Non-Blocking Throughput: 26 Gbps
- Switching Capacity: 52 Gbps
- Forwarding Rate: 38.69 Mpps
- Max. Power Consumption: 500W
- Power Method: 100-240VAC/50-60 Hz, Universal Input
- Power Supply: AC/DC, Internal, 500W DC
- LEDs Per Port -RJ45 Data Ports: PoE, Speed/Link/Activity
- LEDs Per PortSFP Data Ports: Speed/Link/Activity
- Networking Interfaces: (24) 10/100/1000 Mbps RJ45 Ethernet Ports, (2) 1 Gbps SFP Ethernet Ports
- Management Interface: Ethernet In/Out Band
- Rack-mount: Yes, 1U High
- ESD/EMP Protection Air: ±24 kV, Contact: ±24 kV
- Operating Temperature: -5 to 40° C
- Operating Humidity: 5 to 95% Non-condensing
- Shock and Vibration: ETSI300-019-1.4 Standard
PoE Per Port
- PoE Interfaces: POE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-), 24VDC Passive PoE (Pins 4, 5+; 7, 8-)
- Max. PoE+ Wattage per Port by PSE: 34.2W
- Voltage Range: 802.3at Mode 50–57V
- Max. Passive PoE Wattage per Port: 17W
- 24V Passive PoE Voltage Range: 20-27V
- Dimensions: 485.04 x 44.45 x 285.6 mm
- Weight: 3.7 kg
- (24) Gigabit RJ45 ports
- (2) SFP ports
- Non-blocking throughput: 26 Gbps
- Switching capacity: 52 Gbps
- Forwarding rate: 38.69 Mpps
- Maximum power consumption: 500W
- Supports POE+ IEEE 802.3at/af and 24V Passive PoE
- Rackmountable

R 11395,00 Add
Ubiquiti 48 Port EdgeSwitch Lite Managed Switch

Ubiquiti 48 Port EdgeSwitch Lite Managed Switch

Scoop's ES48-LITE, EdgeSwitch™ Lite by Ubiquiti simultaneously processes traffic on all ports at line rate without any packet loss and offers total non-blocking throughput of up to 70 Gbps for this 48-port model.
The ES48-LITE features (48) Gigabit RJ45 Ports, (2) SFP+ Ports, (2) SFP Ports, (1) Serial Console Port, non-blocking throughput of 70 Gbps, maximum power consumption of 56W and a DC Input Option (Redundant or Stand-Alone).

Specifications - Total Non-Blocking Throughput: 70 Gbps
- Switching Capacity: 140 Gbps
- Forwarding Rate: 104.16 Mpps
- Max. AC Power Consumption: 56W
- Power Method AC: 100-240VAC/50-60 Hz, Universal Input
- Power Method DC: DC 56W, 25 to 16V, with 2.5 mm DC Power Inline Connector
- Power Supply: AC/DC, Internal, 56W DC
- LEDs Per Port - Serial Console Port: N/A
- LEDs Per Port - RJ45 Data Ports: Speed/Link/Activity
- LEDs Per Port - SFP+/SFP Data Ports: Speed/Link/Activity
- Networking Interfaces: (48) 10/100/1000 Mbps RJ45 Ethernet Ports
- Networking Interfaces: (2) 1/10 Gbps SFP+ Ethernet Ports
- Networking Interfaces: (2) 1 Gbps SFP Ethernet Ports
- Management Interface: (1) RJ45 Serial Port, Ethernet In/Out Band
- Rack-mount: Yes, 1U High
- ESD/EMP Protection: Air: ±24 kV, Contact: ±24 kV
- Operating Temperature: -5 to 40° C
- Operating Humidity: 5 to 95% Non-condensing

- Dimensions: 443 x 43 x 286 mm
- Weight: 3.65kg Rack-Mount Brackets Included - Weight: 3.56kg Rack-Mount Brackets Excluded

R 7550,00 Add
Ubiquiti 48 Port Gigabit + SFP 500W PoE Switch

Ubiquiti 48 Port Gigabit + SFP 500W PoE Switch

Scoop's ES48-500 EdgeSwitch™ by Ubiquiti delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput of up to 70 Gbps for this 48-port model.
The ES48-500 is ideal for building and expanding networks. Ubiquiti Networks® EdgeSwitch™, is part of the EdgeMAX® line of products and is a fully managed, PoE+ Gigabit switch, capable of delivering robust performance and intelligent switching for growing networks. It offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.

Specifications - Total Non-Blocking Throughput: 70 Gbps
- Switching Capacity: 140 Gbps
- Forwarding Rate: 104.16 Mpps
- Max. Power Consumption: 500W
- Power Method: 100-240VAC/50-60 Hz, Universal Input
- Power Supply: AC/DC, Internal, 500W DC
- LEDs Per Port - Serial Console Port: N/A
- LEDs Per Port - RJ45 Data Ports: PoE, Speed/Link/Activity
- LEDs Per Port - SFP+/SFP Data Ports: Speed/Link/Activity
- Networking Interfaces: (48) 10/100/1000 Mbps RJ45 Ethernet Ports
- Networking Interfaces: (2) 1/10 Gbps SFP+ Ethernet Ports
- Networking Interfaces: (2) 1 Gbps SFP Ethernet Ports
- Management Interface: (1) RJ45 Serial Port, Ethernet In/Out Band
- Rack-mount: Yes, 1U High
- ESD/EMP Protection: Air: ±24 kV, Contact: ±24 kV
- Operating Temperature: -5 to 40° C
- Operating Humidity: 5 to 95% Non-condensing
- Shock and Vibration: ETSI300-019-1.4 Stand
- Dimensions: 485 x 43.7 x 374.6 mm
- Weight: 6.1 kg

R 14250,00 Add
Ubiquiti 48 Port Gigabit + SFP 750W PoE Switch

Ubiquiti 48 Port Gigabit + SFP 750W PoE Switch

Scoop's ES48-750 EdgeSwitch™ by Ubiquiti delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput of up to 70 Gbps for this 48-port model.
The ES48-750 is ideal for building and expanding networks. Ubiquiti Networks® EdgeSwitch™, is part of the EdgeMAX® line of products and is a fully managed, PoE+ Gigabit switch, capable of delivering robust performance and intelligent switching for growing networks. It offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.

Specifications - Total Non-Blocking Throughput: 70 Gbps
- Switching Capacity: 140 Gbps
- Forwarding Rate: 104.16 Mpps
- Max. Power Consumption: 750W
- Power Method: 100-240VAC/50-60 Hz, Universal Input
- Power Supply: AC/DC, Internal, 750W DC
- LEDs Per Port - Serial Console Port: N/A
- LEDs Per Port - RJ45 Data Ports: PoE, Speed/Link/Activity
- LEDs Per Port - SFP+/SFP Data Ports: Speed/Link/Activity
- Networking Interfaces: (48) 10/100/1000 Mbps RJ45 Ethernet Ports
- Networking Interfaces: (2) 1/10 Gbps SFP+ Ethernet Ports
- Networking Interfaces: (2) 1 Gbps SFP Ethernet Ports
- Management Interface: (1) RJ45 Serial Port, Ethernet In/Out Band
- Rack-mount: Yes, 1U High
- ESD/EMP Protection: Air: ±24 kV, Contact: ±24 kV
- Operating Temperature: -5 to 40° C
- Operating Humidity: 5 to 95% Non-condensing
- Shock and Vibration: ETSI300-019-1.4 Stand
- Dimensions: 485 x 43.7 x 374.6 mm
- Weight: 6.5 kg

R 17595,00 Add
Ubiquiti 6 Port EdgePoint Router 5 PoE, 1 SFP

Ubiquiti 6 Port EdgePoint Router 5 PoE, 1 SFP

Ubiquiti offers an innovative combination of robust routing performance, fibre back-haul capability, and the convenience of passive PoE support.
The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI). FiberProtect greatly improves data signal integrity, and consolidates the wired-data back-haul to a single fibre cable run for long-distance connectivity.

It's link-balancing routing feature provides redundancy for outdoor wireless links.
Specifications - Enclosure Characteristics: Polycarbonate with UV Resistance
- Max. Power Consumption: 7W (Excludes PoE Output)
- Power Input: (1) DC Terminal Block or (1) RJ45 (eth0)
- Power Input: Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs
- Power Supply: Min. 24V / 0.3A (Excludes PoE Output Power)
- VDC Input: 24V, 3A
- Passive PoE Input: (1) 24V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth0
- Passive PoE Input: Do NOT Configure eth0 in PoE Output Mode if using a PoE Input Power Source
- Passive PoE Output: (5) 24V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth0 to eth4
- Power Monitoring: (1) DC Terminal Block, Input Power, (1) RJ45, eth0,
- Input Power: Supported Voltage Range 26 - 16VDC
- Button: Reset
- LED System: Power
- LED eth0 - eth4: Speed / Link / Activity, PoE
- LED eth5/SFP: Speed / Link / Activity
- Data Ports: (5) 10/100/1000 RJ45 Ports, (1) 1 Gbps SFP Port
- Processor: Dual-Core 880 MHz, MIPS1004Kc
- System Memory: 256 MB DDR3-1600 RAM
- Code Storage: 256 MB NAND
- Pole Mount: Yes
- Operating Temperature: -40 to 65° C
- Operating Humidity: 10 to 90% Non-condensing

- Dimensions: 188.6 x 177.1 x 49.8 mm
- Weight: 605 g

R 2275,00 Add
Ubiquiti 8 Port EdgePoint Router 6 PoE, 2 SFP

Ubiquiti 8 Port EdgePoint Router 6 PoE, 2 SFP

Ubiquiti's EP-R8 EdgePoint™ offers an innovative combination of robust routing performance, fibre back-haul capability, and the convenience of passive PoE support.
The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI). FiberProtect greatly improves data signal integrity, and consolidates the wired-data back-haul to a single fibre cable run for long-distance connectivity.

It's link-balancing routing feature provides redundancy for outdoor wireless links.

Specifications - Enclosure Characteristics: Diecast Aluminum Alloy and Polycarbonate with UV Resistance
- Max. Power Consumption: 40W (Excludes PoE Output)
- Power Input: (1) DC Terminal Block or (2) RJ45 (PoE In and eth0)
- Power Input: Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs
- Power Supply: Min. 54V / 0.8A (Excludes PoE Output Power)
- VDC Input: 54V, 6A
- Passive PoE Input: (2) 54V / 1.5A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth0 and PoE In (PoE In is DC Only, No Data)
- Passive PoE Output: (2) 54V or 24V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth1 to eth2, (5) 24V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth3 to eth7
- Power Monitoring: (1) DC Terminal Block, Input Power, (2) RJ45, PoE In and eth0, Input Power
- Button: Reset
- LED System: Power
- LED eth0 - eth4: Speed / Link / Activity
- LED eth1 to eth7: Speed / Link / Activity, PoE
- LED SFP: Speed/Link/Activity
- Serial Console Port: (1) RJ45 Serial Port
- PoE In Port: (1) RJ45 Port
- Data Ports: (6) 10/100/1000 RJ45 Ports, (2) 10/100/1000 RJ45/SFP Combination Ports
- Processor: Dual-Core 600 MHz, MIPS64 with Hardware Acceleration for Packet Processing
- System Memory: 2 GB DDR3-1600 RAM
- Code Storage: 4 GB
- Pole/Wall Mount: Yes
- Operating Temperature: -40 to 65° C
- Operating Humidity: 10 to 90% Non-condensing
- Dimensions: 326.6 x 382.7 x 88.8 mm
- Dimensions with wall mount: 326.6 x 382.7 x 105.5 mm
- Weight: 3.4 kg
- Weight with wall mount: 3.8 kg

R 8550,00 Add
Ubiquiti 8 Port Gigabit + SFP 150W PoE Switch

Ubiquiti 8 Port Gigabit + SFP 150W PoE Switch

Build and expand your network with Ubiquiti Networks® EdgeSwitch™, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.

The ES8-150 provides total, non-blocking throughput of up to 10 Gbps with 8 PoE Gigabit Ethernet ports of auto-sensing IEEE 802.3af/at PoE to simplify your infrastructure.

Specifications - Total Non-Blocking Throughput: 10 Gbps
- Switching Capacity: 20 Gbps
- Forwarding Rate: 14.88 Mpps
- Max. Power Consumption: 150W (Includes PoE Output)
- Power Method: AC, 100-240VAC/50-60 Hz, AC/DC Integrated PSU, Universal Input
- Power Method: DC, 42 to 56VDC External, (Self-Correcting Polarity Protection) Terminal Block Input
- Power Supply: AC/DC, Internal, 150W DC
- LEDs Per Port - RJ45 Data Ports: PoE, Speed/Link/Activity
- LEDs Per Port - SFP Data Ports: Speed/Link/Activity
- Networking Interfaces: (8) 10/100/1000 Mbps RJ45 Ethernet Ports
- Networking Interfaces: (2) 1 Gbps SFP Ethernet Ports
- Management Interfaces: (1) RJ45 Serial Port, Ethernet In/Out Band
- Wall-mount: Yes
- ESD/EMP Protection: Air: ±24 kV, Contact: ±24 kV
- Operating Temperature: Internal AC/DC @ 150W -25 to 45° C
- Operating Temperature: Internal AC/DC @ 100W -25 to 55° C
- Operating Temperature: External DC -25 to 60° C
- Operating Humidity: 5 to 95% Non-condensing
- Shock and Vibration: ETSI300-019-1.4 Standard
- Dimensions: 204 x 43 x 235 mm
- Weight: 1.72 kg (1.8 kg With Mount Brackets)
PoE per Port
- PoE Interfaces: POE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-) 24VDC Passive PoE (Pins 4, 5+; 7, 8-)
- Max. PoE+ Wattage per Port by PSE: 34.2W
- Voltage Range 802.3at Mode: 50–57V
- Max. Passive PoE Wattage per Port: 17W
- 24V Passive PoE Voltage Range: 20-27V

R 3875,00 Add
Ubiquiti EdgeRouter Pro 8, 8-port Router, 2 SFP

Ubiquiti EdgeRouter Pro 8, 8-port Router, 2 SFP

Ubiquiti's ER-PRO8, EdgeRouter™ PRO combines 2 million+ packets per second performance with fibre connectivity options. It delivers uptime performance equal to leading carrier or enterprise technology solutions and provides six independent, RJ45 Gigabit ports and two RJ45/SFP combination Gigabit ports. The durable, 1U-high metal chassis allows for convenient mounting in a standard-sized, 19”-wide rack. The EdgeRouter PRO 8's intuitive, graphical user interface is easy to learn and makes routing features simple to configure and monitor. It includes an integrated Command-Line Interface (CLI) for convenient access to advanced functions.

Specifications Max. Power Consumption: 40 W
Power Internal AC/DC Power Adapter: 60 W (24V, 2.5A)
Power Input: 110 - 240VAC
Button: Reset
LEDs Per Data Port: Speed/Link/Activity
Serial Console Port: (1) RJ45 Serial Port
Data Ports: (6) 10/100/1000 RJ45 Ports, (2) 10/100/1000 RJ45/SFP Combination Ports
Layer 3 Forwarding Performance - Packet Size 64 Bytes: 2,400,000 pps
Packet Size 512 Bytes or Larger: 8 Gbps (Line Rate)
Processor: Dual-Core 1 GHz, MIPS64 with Hardware Acceleration for Packet Processing
System Memory: 2 GB DDR3 RAM
On-Board Flash Storage: 4 GB
Rack-Mount: Yes
Operating Temperature: -10 to 45° C
Operating Humidity: 10 - 90% Non-condensing
Dimensions: 484 x 164 x 44 mm
Weight: 2.3 kg

R 6550,00 Add
Ubiquiti EdgeRouterX 5-port Gigabit SFP Router

Ubiquiti EdgeRouterX 5-port Gigabit SFP Router

Scoop's ER-XSFP EdgeRouter™X-SFP Advanced Gigabit Router with PoE and SFP by Ubiquiti combines carrier‑class reliability with excellent price‑to‑performance value in an ultra‑compact form factor.

The ER-XSFP model, is powered by an external power adapter. The five Gigabit RJ45 ports support 24V passive PoE output for airMAX or UniFi® devices, while its SFP port provides fiber connectivity to support backhaul applications.

Specifications - Networking Interfaces: 5
- Data Port: (1) 100/1000 SFP Port
- Data/PoE Output Port: (5) 10/100/1000 RJ45 Ports
- Max. Power Consumption: 5W
- Max. Total PoE Output: 50W @ 24V
- PoE Output: Passive 24V (Pins 4, 5+; 7, 8-)
- Power Input: 24VDC, 2.5A Power Adapter (Included)
- Power Supply: External AC/DC Adapter
- Supported Voltage Range: 9 to 26VDC
- Button: Reset
- LED: Power, Link/Activity (6), PoE (5)
- Processor Dual-Core 880 MHz, MIPS1004Kc
- System Memory: 256 MB DDR3 RAM
- Code Storage: 256 MB NAND
- Wall-Mount: Yes
- ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV
- Operating Temperature: -10 to 45° C
- Operating Humidity: 10 to 90% Non-condensing
- PoE Out Voltage Range: 22-24VDC
- Max. PoE Wattage Per Data/PoE Output Port: 12W (24V)
- Max. PoE Wattage Combined (All 5 Data Ports): 50W
- PoE Method: Passive
- Dimensions: 142 x 75 x 23 mm
- Weight: 215 g

R 1425,00 Add
Ubiquiti Grounded Ethernet Surge Protector

Ubiquiti Grounded Ethernet Surge Protector

Introducing Scoop's UB-ETHSP, Ethernet Surge Protector, from Ubiquiti Networks. It is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges.
The ETH-SP is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility. Compatible with 10/100/1000 Mbps Networks

It is ideal for WISP Networks as damaging ESD attacks and surges will be absorbed by the ETH-SPs and safely discharged into the ground.

Specifications - Interface Connections: (2) RJ45 Female Connectors
- ESD/EMP Protection: Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs
- DC Spark-Over Voltage: 90V @ 100V/s
- Maximum Impulse Spark-over Voltage: 700V @ 1kV/µs
- Discharge Current: 5kA (Maximum), 0.5kA (Normal)
- Maximum Insulation Resistance: 1G ohm @ 50V
- Maximum Capacitance: 1.0 pF @ 1 MHz
- Data Line Protection: RJ45 10/100/1000 Ethernet
- IEEE 802.3af PoE Support: Yes
- Shock and Vibration Certification: ETSI300-019-1.4 Standard
- Operating Temperature: -30 to 65° C
- Operating Humidity: 10 to 90% Noncondensing
- Dimensions: 91 x 61 x 32.5 mm
- Weight: 80 g

R 160,00 Add
Ubiquiti Unifi Security Gateway Pro 4-Port

Ubiquiti Unifi Security Gateway Pro 4-Port

Scoop's USG-PRO4, UniFi® Security Gateway, extends the UniFi Enterprise System to encompass routing and security for your network. The UniFi Security Gateway combines reliable security features with high‑performance routing technology in a cost-effective unit.
The USG-PRO4 is rack-mountable, with fiber connectivity options and a dual-core, 1 GHz processor for maximum hardware‑accelerated performance.

Specifications - Max. Power Consumption: 40W
- Power Supply: Internal AC/DC Power Adapter, 60W (24V, 2.5A)
- Power Input: 110 - 240VAC
- LEDs System: Status
- LED's Data Ports: Speed/Link/Activity
- Networking Interfaces - Serial Console Port: (1) RJ45 Serial Port
- Networking Interfaces - Data Ports: (2) 10/100/1000 RJ45 Ports, (2) 10/100/1000 RJ45/SFP combination Ports
- Layer 3 Forwarding Performance (Packet Size: 64 Bytes): 2,400,000 pps
Packet Size: 512 Bytes or Larger - Layer 3 Forwarding Performance (Packet Size: 512 Bytes or Larger): 4 Gbps Line Rate
- Processor: Dual-Core 1 GHz, MIPS64 with Hardware Acceleration for Packet Processing
- System Memory: 2 GB DDR3 RAM
- On-Board Flash Storage: 4 GB
- Rack-mount: Yes
- Operating Temperature: -10 to 45° C
- Operating Humidity: 10 to 90% Non-condensing

- Dimensions: 484 x 44 x 164 mm
- Weight: 2.3 kg

R 5275,00 Add
Ubiquiti Unifi Security Gateway Router + Firewall

Ubiquiti Unifi Security Gateway Router + Firewall

Scoop's USG, UniFi Security Gateway, by Ubiquiti, extends the UniFi Enterprise System to encompass routing and security for your network. The UniFi Security Gateway combines advanced security features with high‑performance routing technology in a compact and cost-effective unit.
Capable of routing up to 1 million packets per second, the UniFi Security Gateway can be easily configured through the intuitive UniFi Controller software, which also manages the UniFi Access Points for wireless networking.

Specifications - Processor: Dual-Core 500 MHz, MIPS64
- System Memory: 512 MB DDR2 RAM
- On-Board Flash Storage: 2 GB
- Max. Power Consumption: 7W
- Power Supply: 12VDC, 1A Power Adapter (Included)
- Power Input: 9 to 24VDC, Supported Voltage Range
- Wall-Mountable: Yes
- Operating Temperature: -10 to 45° C
- Operating Humidity: 10 to 90% Non-condensing
- Layer 3 Forwarding Performance: Packet Size: 64 Bytes 1,000,000 pps, Packet Size: 512 Bytes or Larger 3 Gbps (Line Rate)
- Networking Interfaces Serial Console Port: (1) RJ45 Serial Port
- Networking Interfaces Data Ports: (3) 10/100/1000 Ethernet Ports*
- Dimensions: 135 x 135 x 28.3 mm
- Weight: 366 g
* VOIP port is disabled and reserved for future use

R 2275,00 Add
Passion for technology
Technology is changing at a rapid rate and it’s important to be aware of these changes. At Solid we love technology and we’re studying new ways of improving the tools we use, not only for the benefit our clients, but also to help our staff work more efficiently.

Passion for people
Our people are the heart of our business. They know how to build honest and long-term relationships. Combined with the most sophisticated tools available, they will always find solutions and deliver the answers in the best way possible.
Back to content | Back to main menu